1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Hand-Me-Down 7

Thread Tools
 
Search this Thread
 
Old Jan 13, 2007 | 03:49 AM
  #1  
ME-B-N-ME's Avatar
Thread Starter
I Make It Rain..
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 7
Likes: 0
From: VA
Hand-Me-Down 7

Not all Hand-Me-downs are as bad as I though... lol well that is what I think now that my Dad gave me his RX7, That has done nothing but sit since he got it, But I started it today.. and drove it aorund the block ^^


Tell me what that is in the back XD look hard








First tiem the cover has been lifted in a year, after I drove it around.. and parted it ti was smoking.. cause all the Radiator hoses.. dry rotted, so I gotta fix that..and its going to know new tired, umm brakes and rotors, anyway.. I dont know much about this car so Im hear to read up
Reply
Old Jan 13, 2007 | 04:47 AM
  #2  
rotornoob's Avatar
emissions r teh sux
Tenured Member 05 Years
iTrader: (2)
 
Joined: Dec 2005
Posts: 888
Likes: 0
From: Stockton Ca
welcome to the darkside buddy this should prove to be an interesting journey for you just as it has been for me

she looks good man. have you named her yet?
Reply
Old Jan 13, 2007 | 05:38 AM
  #3  
rxtasy3's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Jun 2002
Posts: 9,579
Likes: 290
From: Spartanburg, SC
first off, welcome. nice gift. doesn't seem to be any rust that i can tell. get that air cleaner on it before u drive it again. must not have been sitting too long if it started right up. planning any mods?
Reply
Old Jan 13, 2007 | 08:15 AM
  #4  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
^^^agreed with above on getting that air cleaner on. get rid of those awful ricer blades. your car is better than that my friend. got any interior or engine bay shots?
Reply
Old Jan 13, 2007 | 10:44 AM
  #5  
bliffle's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 2,815
Likes: 0
From: SF BayArea
Get some semi-gloss black rustoleum spray for the trim and some 800 wetpaper to rub the trim down. mask and shoot. Makes a big difference. The red can be worked carefully with Polishing compound from the autostore. If that's the original red you can get matching paint from paintscratch.com in various forms and quantities.

Flush the cooling system thoroughly. It helps to get that $6 Prestone plastic flush kit from the autostore. I install the plastic tee in the lower heater hose on the passenger side near the radiator. You will find it useful.

Change all the lubes. Put a good gearlube (I use Redline MTF) in the gearbox, it makes a big difference in shifting, and the box will last longer. Use a good gear lube like Redline, AMS, etc., in the diff. Use the LSD stuff even tho you don't have an LSD. You can use dino oil or synthetic in the engine as long as you keep the oil sorta clean, which you can do by replacing the filter every month or so (it's so easy!).
Reply
Old Jan 13, 2007 | 10:51 AM
  #6  
OnlyOnThurs's Avatar
TACOCAT
Tenured Member: 20 Years
 
Joined: Aug 2004
Posts: 3,042
Likes: 2
From: Milky Way
Nice and WELCOME!! oh AND CHAGE THE FUEL FILTER ASAP!!!
Reply
Old Jan 13, 2007 | 11:07 AM
  #7  
MattG's Avatar
MattG FTW!!!!!
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2005
Posts: 2,733
Likes: 1
From: South Windsor, CT
My car is also a hand me down, if you would like to call it that!

I like to call it carrying on the tradition!

Listen to the advice you have been given! Change all your fluids, filters, hoses, etc! There is no reason to have an engine fail, becuase you cheaped out and didnt replace a cheap part.

Also, what are you refering too when you say "Tell me what that is in the back XD look hard?"
Reply
Old Jan 13, 2007 | 05:39 PM
  #8  
vipergts_3's Avatar
G0D OF DEATH
Tenured Member 15 Years
iTrader: (9)
 
Joined: May 2006
Posts: 1,051
Likes: 0
From: Illinois
i see a couple of things , tools . some blue breather cover and ... oh my ... what big speakers you have !! they almost look too big for the back of the car ! what kind of stereo is in it ? oh , i think that those mirrors need to be replaced with different ones
Reply
Old Jan 13, 2007 | 11:04 PM
  #9  
bliffle's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 2,815
Likes: 0
From: SF BayArea
Oh yeah, change the hydraulic fluid in the clutch system. It's pretty easy to do and it's worth wasting some fluid to get all the bad old stuff out and gone. And the old stuff IS bad, no matter what you may think. Most of us have replaced master cyl, slave cyl and flexihose because they deteriorated from nasty fluid with water in it. It's kinda hard to replace the master and slave, and it's sometimes a problem bleeding when you've installed new cylinders.

So get a big bottle of hydraulic fluid, a clear vinyl hose that fits the bleed nipple on the slave, and a quart beer bottle to catch the crap you pump out when you operate the clutch pedal. Keep refilling the reservoir until clean stuff comes out of the bleed nipple. You'll be sorry if you don't, because one day you'll have to drive back home without using the clutch (which you get a chance to learn in case you didn't learn it on a farm tractor when you were 12), then you get to skin knuckles putting in new cylinders.
Reply
Old Jan 14, 2007 | 01:38 AM
  #10  
ME-B-N-ME's Avatar
Thread Starter
I Make It Rain..
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 7
Likes: 0
From: VA
hmmm mods.. dunno it wont start no more. so Im changing Fluids and what not.. lol the interior is crapy.. but I can take pics alogn with the bay, I was lost the first time I looked under the hood.. it looks like a ball of motor XD nothing is in the same spot as it was on my CRX... but Im slowly finding my way around it, I got som extra cash by selling the big speakers and amp in the back.. XD
Reply
Old Jan 14, 2007 | 05:20 PM
  #11  
notveryhappyjack's Avatar
1 bar boost
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jun 2005
Posts: 2,753
Likes: 5
From: Seattle, Washington
fuel filter first meng
Reply
Old Jan 14, 2007 | 05:45 PM
  #12  
gsl-se addict's Avatar
Super Moderator
Tenured Member 15 Years
iTrader: (3)
 
Joined: Jan 2003
Posts: 5,088
Likes: 11
From: Lynchburg, VA
Looks good. Where in VA are you? I am in Lynchburg. I can give you a hand sometime if you are close.

Kent
Reply
Old Jan 15, 2007 | 02:01 AM
  #13  
ME-B-N-ME's Avatar
Thread Starter
I Make It Rain..
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 7
Likes: 0
From: VA
Really!!! that woudl be great will need all the help I can get.. but I will ahve to wait a week or so when I get cash to buy some fo the stuff I need.. till then I would just toss all the cary on that is ugly.. like the wiper blades ><
Reply
Old Jan 15, 2007 | 10:03 AM
  #14  
kymber39845's Avatar
Babyboo
 
Joined: Jan 2007
Posts: 246
Likes: 0
From: Donalsonville, GA
Too bad you don't live nearby...I have an extra set of stock 83 wiper blades and mirrors....LOL Seriously...listen to these guys...I'm just a girl and have been told time and time again I can't possibly know anything about cars because I have *****, but I agree with them about the fluid and filter changes. I just went through something similiar. My car sat up without a motor for many years and before I would even turn that key on the motor I put in I changed out everything I could. Even with spare parts on the other car that I knew were fine, I put out the extra money for all new stuff. The only thing I forgot to change was one of the heater hoses....of course it blew on her first test run. She runs great now!
Reply
Old Jan 15, 2007 | 11:50 AM
  #15  
MattG's Avatar
MattG FTW!!!!!
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2005
Posts: 2,733
Likes: 1
From: South Windsor, CT
See its always the simple things that get ya. lol Its gotten me too!
Reply
Old Jan 16, 2007 | 02:01 AM
  #16  
ME-B-N-ME's Avatar
Thread Starter
I Make It Rain..
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 7
Likes: 0
From: VA
Yeah, glad my friend works at auto zone.... inda short on cash but thanks to him got alot of the stuff I need for cheap, and I was just about to ask about them Side Mirrors.. as I look at others 7s.. I see that more are diffrent.. >< and I got new blades for it lol
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotarycal
Introduce yourself
22
May 16, 2013 03:20 PM
Kill No Cone
Race Car Tech
4
Nov 14, 2007 04:47 PM
Kill No Cone
1st Generation Specific (1979-1985)
5
Nov 11, 2007 08:05 PM




All times are GMT -5. The time now is 06:59 PM.