Gauge Readings
#2
Fighting Global Cooling
iTrader: (6)
Join Date: Mar 2009
Location: Minneapolis, Minnesota
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Gas should be above Empty, oil should be between approx 30-60psi depending on the revs, Volts should be a little above 12, tach should be at 7k once a day atleast, speedo, as high as you can get it without getting caught, and my temp was always right around the little marking in the middle of the gauge, depends on what your dash style is. What year is your rx7?
#3
it has an 83 motor but possibly a 79 tach bc it's a 79 chassis. there are also 3 gauges in the center console. oil pressure. oil temp and water temp i think. i will check for sure when i get home. the oil pressure is usually 40psi unless i give it a real good rev. and the tach, tickin clock, engine temp and water temp dont work. i will make check all what works and doesnt. thats all i remember right now, im thinkin some wiring issues so i will get my electrical engineer friend over again and have him fix it if it is wiring.
#7
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,849
Received 2,613 Likes
on
1,852 Posts
Trending Topics
#10
those are the gauges. clock doesnt tick, no rpms, not sure bout speed yet, not temp, and no water temp. but waht shuld the three gauges read that are in the center, i know oil pressure is like 30-60 at idle. its 40 for me
Last edited by food7373; 11-10-09 at 08:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
1
08-29-15 12:22 AM