well here we go... last week i rebuilt my nikki carb. good **** its all nice and clean it looks pretty and all, now my issue is that it keeps flooding my engine. ::details:: carb is off a junkyard car an 85 gsl i rebuilt the carb, the fuel pump is controlled by a on/off switch that the previsous owner put on... i also have most of the vaccum lines that i dont need off. no emissions. i've tried adjusting the float boats my-self and was unsuccessful... i was told i can just put another nikki on without rebuilding it and it would work fine... its just a matter of me going to the junkyard and puttting one off but will it be worth it and will it work!??! or should i stick with my nikki i rebuilt and keep tring to fix it?!

 

check bstrange99's post on the nikki carb flooding problem. Some good info there.

 

yeah thanks. i saw it after i sumitted this thread d'oh

 

If this fixes the problem, please post it in the thread. Or, if you find anothe solution, post it in there.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/12a-nikki-flooding-issues-look-first-587285/