RE Matsuda

Here are a few quick vids of my 13BT GSL, still breaking in the new clutch so nothing crazy, but I figured it would be good inspiration for all those in the middle of turbo swaps.

-1/2 throttle run, shifting around 4-5000rpm through 2nd and 3rd. The camera is taped to a cardboard box (ghetto?) so I look back to make sure it hasn't fallen off:
http://media.putfile.com/RX_run

-Outside, just cruising by the camera in 3rd:
http://media.putfile.com/RX_1

-A few revs from outside of the car:
http://media.putfile.com/RX_rev

-Another 1/2 throttle run, much like the 1st one. And yes, it does chirp 4th gear:
http://media.putfile.com/RX_run2

-3rd to 4th at about 5000rpm, then I ran out of tape:
http://media.putfile.com/RX_down

I'll try and get some flat-out runs for you guys once I get a few more miles on the clutch and some better tires. Cheers.

camocarl

iTrader: (5)

Nice bro! You got a deal from David!!! I need to sell ya a set of 15x7 Mesh for it now!

RE Matsuda

Thanks Carl. Yeah I definitely couldn't pass up the deal David was offering, who is a really cool guy by the way. You read my mind on the 15" mesh, thats next on the list now that the clutch is sorted. I want to see if I can fit some 225's in the back, or at least some 205 drag radials. Right now, just rolling onto the throttle in 2nd causes massive wheel spin

RE Matsuda

For those wondering about the set-up, heres some info on the car:
http://www.teamfc3s.org/forum/member...iew&car_id=961

1sgen

iTrader: (1)

what kind of a clutch are using and how much hp to the wheel do you have ,im looking for a clutch that will handle around 500 rwhp , it has to fit a t2 tranny

FB II

i love the way your car sounds! very nice tone to it.



spec has the clutch you are looking for. handles over 500lbs/ft of torque!

RE Matsuda

I'm using an ACT SS Disk and Heavy Duty PP, not sure what kind of power its making but it's no where near 500rwhp. For that kind of power I'd look for either a twin-plate (Ogura is great), or like an ACT 6 or 4 puck with their Xtreme pressure plate.

Directfreak

iTrader: (2)

Spec is the POS clutch that shattered on my carm at the track.

FB II

oh nevermind! **** THAT!!! i thought you had something else... NOOOOOO!!!!! that's what my friend just bought for his TII.

ACT BABY! lol

rotor vs. piston

225's fit back there with no issue, just minor rubbing on heavy bumps.

RE Matsuda

Good to hear, have to make sure the offset it just right on the wheels.

Jesuscookies

iTrader: (1)

Yeah, I am a pretty cool guy, Haha. Glad to see you got that badboy going. Hopefully, the reg situation is going better this time.