Fb 5 lug conversion
03-15-18, 12:16 PM
#3
There are a lot of threads here on the forum on how to do this. You either have to redrill the current rotors (not recommended) or buy/make a new kit. This includes creating/buying a spindle adapter and then using gen 2 RX-7 brakes (rotors/calipers/etc). There is a common kit originally from RE-Speed (no longer in the RX-7 business). This kit has been duplicated by several people. One of those sells them on the big sales site every once in a while. Cost about $450 for all the parts the do the front and rear. You supply the gen 2 brake components.
I have a complete front and rear setup in the forsale section that includes everything already put together. It's not cheap. I also have a spare set of gen 2 front and rear brakes (hub/calipers/rotors/etc) that can be used with a kit you buy.
https://www.rx7club.com/1st-generati.../#post12260608
I have a complete front and rear setup in the forsale section that includes everything already put together. It's not cheap. I also have a spare set of gen 2 front and rear brakes (hub/calipers/rotors/etc) that can be used with a kit you buy.
https://www.rx7club.com/1st-generati.../#post12260608
Thread
Thread Starter
Forum
Replies
Last Post
musicman3x
2nd Generation Specific (1986-1992)
2
01-22-07 08:40 AM
forced inducted fd dude
Suspension/Wheels/Tires/Brakes
3
09-14-06 04:31 PM
WannaSeeMyWankel
2nd Generation Specific (1986-1992)
6
11-30-04 04:02 PM
Kreb
2nd Generation Specific (1986-1992)
4
11-19-02 04:31 PM