cheaper alternative to stock oil cooler lines.....
cheaper alternative to stock oil cooler lines.....
Hey.... i just pulled the motor out of my gsl-se parts car... i was planning on keeping the oil cooler lines because im putting the oil cooler into my 81.... anyhow... i was unable to get the lines off when pulling the motor... the lines were frayed and not in that good of shape so i cut them... will i be able to use any kind of rubber hose and clamp it until i can get a nice braided steel line set from summit?....
-greg
-greg
If you use any rubber hose and clamps you have will all most certainly blow the hoses off and be a loser.
Any rubber hose is unlikely to be compatible with hot engine oil.
Also a hose clamp isn't designed to withstand 60+psi.
Its not worth losing an engine.
Any rubber hose is unlikely to be compatible with hot engine oil.
Also a hose clamp isn't designed to withstand 60+psi.
Its not worth losing an engine.
Originally posted by Bruceman
If you use any rubber hose and clamps you have will all most certainly blow the hoses off and be a loser.
Any rubber hose is unlikely to be compatible with hot engine oil.
Also a hose clamp isn't designed to withstand 60+psi.
Its not worth losing an engine.
If you use any rubber hose and clamps you have will all most certainly blow the hoses off and be a loser.
Any rubber hose is unlikely to be compatible with hot engine oil.
Also a hose clamp isn't designed to withstand 60+psi.
Its not worth losing an engine.
even that one made me laugh to my self just now. anyways dont do it! i still tried to get one found a line at a place that has parts from airplanes fond a line that would freaking break glass 3000psi and the inside diameter was a lil smaller gave me a nice "Airplane Sound" hahahahahahahahahahahahahahahahahahahahahahahahaa. ......go to the yard and pull some or wait and save $$$$
Trending Topics
how r ya. actually, i went ahead and used 81 gsl 3rd member in the RX-3. I will try it out this weekend. Otherwise, here comes a welded 79 open diffy.
still playing a good husband so my wife will say, "Go and buy it."
still playing a good husband so my wife will say, "Go and buy it."
Originally posted by wackyracer
how r ya. actually, i went ahead and used 81 gsl 3rd member in the RX-3. I will try it out this weekend. Otherwise, here comes a welded 79 open diffy.
still playing a good husband so my wife will say, "Go and buy it."
how r ya. actually, i went ahead and used 81 gsl 3rd member in the RX-3. I will try it out this weekend. Otherwise, here comes a welded 79 open diffy.
still playing a good husband so my wife will say, "Go and buy it."
Wifey - " Mel, why don't you get that."
Wifey - "Will it make your car faster?"
Mel - "Yes"
Wifey - "Then just go buy them!"
Mel - ...........................................
oh, okay.hahaha....
Thread
Thread Starter
Forum
Replies
Last Post




