1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

cheaper alternative to stock oil cooler lines.....

Thread Tools
 
Search this Thread
 
Old May 8, 2003 | 05:47 AM
  #1  
Gregs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Nov 2002
Posts: 4,980
Likes: 0
From: KING COUNTY, WA
cheaper alternative to stock oil cooler lines.....

Hey.... i just pulled the motor out of my gsl-se parts car... i was planning on keeping the oil cooler lines because im putting the oil cooler into my 81.... anyhow... i was unable to get the lines off when pulling the motor... the lines were frayed and not in that good of shape so i cut them... will i be able to use any kind of rubber hose and clamp it until i can get a nice braided steel line set from summit?....


-greg
Reply
Old May 8, 2003 | 11:24 AM
  #2  
Bruceman's Avatar
Rotor Power Rules
iTrader: (5)
 
Joined: Jul 2001
Posts: 525
Likes: 2
From: Rochester Hills, MI
If you use any rubber hose and clamps you have will all most certainly blow the hoses off and be a loser.
Any rubber hose is unlikely to be compatible with hot engine oil.
Also a hose clamp isn't designed to withstand 60+psi.

Its not worth losing an engine.
Reply
Old May 8, 2003 | 11:37 AM
  #3  
1984se's Avatar
Ryan
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,534
Likes: 0
From: Los Angeles, Ca 323/213/818/626
Originally posted by Bruceman
If you use any rubber hose and clamps you have will all most certainly blow the hoses off and be a loser.
Any rubber hose is unlikely to be compatible with hot engine oil.
Also a hose clamp isn't designed to withstand 60+psi.

Its not worth losing an engine.
my thoughts exactly. i almost made the same mistake (osh for the water lines on behind the toilet) even that one made me laugh to my self just now. anyways dont do it! i still tried to get one found a line at a place that has parts from airplanes fond a line that would freaking break glass 3000psi and the inside diameter was a lil smaller gave me a nice "Airplane Sound" hahahahahahahahahahahahahahahahahahahahahahahahaa. ......go to the yard and pull some or wait and save $$$$
Reply
Old May 8, 2003 | 11:44 AM
  #4  
Siraniko's Avatar
RX for fun
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,926
Likes: 25
From: Socal
ryan
if you ever need oil cooler hoses done, bring your stock ones to hoseman in irwindale and they will replace the lines. appx $60 for a set. no need to buy expensive AN fittings.
Reply
Old May 8, 2003 | 11:57 AM
  #5  
1984se's Avatar
Ryan
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,534
Likes: 0
From: Los Angeles, Ca 323/213/818/626
your here again
Reply
Old May 8, 2003 | 02:06 PM
  #6  
Siraniko's Avatar
RX for fun
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,926
Likes: 25
From: Socal
in and out.
Reply
Old May 8, 2003 | 03:11 PM
  #7  
81Rex6port13b's Avatar
I Push My Car Real Fast!
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 1,072
Likes: 0
From: Riverside CA
wackyracer is right there is also a hoseman in riverside. they made me oil cooler lines for $50 with new fittings.
Reply
Old May 8, 2003 | 03:14 PM
  #8  
1984se's Avatar
Ryan
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,534
Likes: 0
From: Los Angeles, Ca 323/213/818/626
WOW! HOSE MAN's COOL.


WACKYRACER'S always right.

I'll be TUBE STEAK MAN. !
Reply
Old May 8, 2003 | 03:28 PM
  #9  
81Rex6port13b's Avatar
I Push My Car Real Fast!
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 1,072
Likes: 0
From: Riverside CA
eh wacky you put them 4.88 gears in? how do they feel? i have a chance to pick them up for 350 but i dont have the money right now i need to get my car moving first.
Reply
Old May 8, 2003 | 05:06 PM
  #10  
Siraniko's Avatar
RX for fun
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,926
Likes: 25
From: Socal
how r ya. actually, i went ahead and used 81 gsl 3rd member in the RX-3. I will try it out this weekend. Otherwise, here comes a welded 79 open diffy.

still playing a good husband so my wife will say, "Go and buy it."
Reply
Old May 8, 2003 | 05:13 PM
  #11  
1984se's Avatar
Ryan
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,534
Likes: 0
From: Los Angeles, Ca 323/213/818/626
Originally posted by wackyracer
how r ya. actually, i went ahead and used 81 gsl 3rd member in the RX-3. I will try it out this weekend. Otherwise, here comes a welded 79 open diffy.

still playing a good husband so my wife will say, "Go and buy it."
hehehe... i can hear it now.

Wifey - " Mel, why don't you get that."
Wifey - "Will it make your car faster?"
Mel - "Yes"
Wifey - "Then just go buy them!"
Mel - ........................................... oh, okay.

hahaha....
Reply
Old May 8, 2003 | 05:20 PM
  #12  
Siraniko's Avatar
RX for fun
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,926
Likes: 25
From: Socal
but there is still no mother's day.

shes not my mom!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FD7KiD
3rd Generation Specific (1993-2002)
15
Feb 26, 2021 10:12 PM
FD7KiD
Single Turbo RX-7's
1
Aug 17, 2015 11:50 PM




All times are GMT -5. The time now is 10:36 PM.