I couldn't find the oil metering block-off plate for the SE, or a FPR on either websites. They have them both for 86-92, but not for the SE for some reason. Where can I get them? For the FPR--is there an aftermarket one that I can use with the stock fuel rail?

Mike

 

are you wanting to use and oem FPR? is so i can get you the oem part number.

 

just checked on the oem FPR part unmber. it is: N318-13-280 and runs about $125 new from the dealer and seems to be the same fpr used for all N/A 84-90 EGI RX-7's.

 

its 84-85 gsl-se and 86-88 t2

for the OMP block off the gsl-se uses the sam metering pump as the s4 (or actually its the other way round...)

 

Thanks guys.

 

I just checked the sites again. Mazdatrix only sells an OMP block-off plate for 79-85 non-SE. It doesn't list any for the SE or 2nd gens at all. RB doesn't seem to sell that part for any RX-7's. I'll just make my own with some scrap metal and gasket material.

 

just make your own bro. use the gasket as a template

 

pineappleracing.com has block offs for around $10. for the FPR its going to be simular to the 86-88 turbo like said b4

 

I'm with Wacky. You feel like more of a man when you make your own block off plate.