looking for a good working used one for a good price id say 15-20? anyone?

 

Spend about $35 at AutoZone and get a brand new lifetime warranty water pump.

 

A waterpump from my local Mazda dealer costs $160, bought mine @ a local parts store for $60.

 

I bought a brand new one with warranty for $40. Installed it myself and works like a charm.

 

I bet you diddn't make your own gasket, the gasket that came wit mine was **** so I had some gasket paper and I made my own gasket using a razor blade, worked like a charm!

 

i used 10lbs of RTV for my gasket.

not literaly 10lbs just a lot.

 

i dont need the gasket i want the pump i just want one that works for like 10 bucks!

 

I got one for $10. you pay shipping..

It was on my engine and I was gonan reuse it /paint it,But I remebered I had a brand new one in the box never used and I painted it up,and gonna use it..
Let me know..

 

God I just dont understand people... You are gonna spend $10 + $10-$12 shipping for a used water pump when a new one is like $30 ?

 

Some people have to learn the hard way I guess. I wouldn't even trust a rebuilt water pump let alone a used one. What happens when that $10 pump goes bad in 6 months? Are you going to spend another ten bucks? Scrape up some more dough and go buy a new one.

 

I guess, I have already been handed those lessions...

 

well i guess you guys are right. they have a new one at daps for 30 bucks but.... they dont have the housing! so how do i go about that? i get the pump and housing for 17 shipped from sorrow and then i dont have to worry much til i need pump then ill buy a new one b/c ill have a housing thats good! go figure, i was actually thinking this time!

 

Yes, we are right. And make sure you get a new gasket and get all of the original gasket off before you put the new pump on.

 

Seems to me I got one cheap at mazdatrix. DON'T use rebuilt or used water pumps. Clean the old gasket crap off, and make sure the hoses are on right and just the right tightness. I usually put some dishwashing soap inside the hose ends to make sure things seat properly. I think new hoses were $5 each at Kragens. Last year I put one in and didn't get the hoses tight enough and worried that the pump was bad until tightening the clamps solved the problem.

B

 

Im keeping the water pump housing..Im 1 rotor away from another engine I should rebuild with just a large street port

 

I bought one for $30 canadian new. From Canadian Tire

 

I got a rear rotor from a low mileage 85. VERY VERY good condition ...