is a b20 turbo to much for a12 street port .?.

 

Alright bro, I'll set you up this time, but you need to research a little more before posting around here. First off its a 12A and if its a stock motor, with any turbo you'll need a rebuild in the near future. $$$$ thats what all its about anymore. 2 a B20 is way too small for a rotary engine. Search it up and look for the 87+ RX-7 Turbo (TII for short) or equal size. This is a project on its own, so becareful.

 

it can not to small can it? the turbo is of 20b turbo II rx7 and has 3 rotary
i got a12 street port with 6k on it!

 

a 20B twin setup would not work on an A12, no matter how many different ways u rearrange the letters or mix up model names of cars... u sure u got an rx7? or maybe a xr7?

 

Huh!!!!??Quit playing scrabble for a second and get your designations right!

TII,2nd gen RX-7 turbo car,has a 2 rotor 13B and a single T-18 turbo,which is perfect for a 12A or 13B turbo project.
The 20B 3 rotor engine has twin turbos and is only sold in the Cosmo luxury car in Japan.No very usable turbos on that,since they are sequential,complex and big.

 

I was under the Impression he was talking about the junk Honduh turbo crap they sell on ebay. Yea dude you need to be clear when you speak here, you'll get picked apart.

 

well i got one 23k on it.


sorry peep...s


my a12 got 165bhp.....17in tws alles ...but so whot...and yes is rx7...must have some kred for that !

 

I'm so confused.

 

damn it 12a not a12

12a 1140 cc 2 rotor stock 100hp
13b 1.3 L 2 rotor stock 135hp to 225hp if you have an rx8
20b 2.0L 3 rotor

 

seriously though, couple questions

A) is english your native language?
if not, than
B) are you of the age in which you can legally drive?

 

do a search no0b!