Adding power steering
#5
Lives on the Forum
iTrader: (13)
Originally Posted by 90turbo1
well how do you do it then???
thanks
thanks
Get a P/S box from either a Gsl-Se or GSL,hoses,pump and mounting bracket and the appropriate belt adjuster, belt and install.
All 1st gen steering boxes bolt in the same place.
Trending Topics
#9
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
Hey trochoid, I have a sucker, I mean friend, who has a 84 GSL-LE that wants to trade me the PS stuff off his car, for a non PS box from a 81 parts car I have. I looked at the mounting bracket for the PS and AC on the 13B. It looks like the AC sits higher, and the AC lines are different. So, you think that I could make this work on my 83 GSL 12A?
#10
Old Fart Young at Heart
iTrader: (6)
AC lines are different on some models due to using different brands of ac compressors on the dealer installed ac kits. Even the 2nd gens have that issue with factory installed ac using 2 different brands of compressors and line sets..
Mounting brackets are intechangeable, as are the ac lines and compressor lines to the firewall and condensor. You need the lines that came with each different compressor.
Mounting brackets are intechangeable, as are the ac lines and compressor lines to the firewall and condensor. You need the lines that came with each different compressor.
#11
Old Fart Young at Heart
iTrader: (6)
Originally Posted by 90turbo1
Is there a way to add a power steering setup to my 1979 RX7.....???
Just a thought.
Just a thought.
I would change the entire column and steering wheel too.
#12
PSHH! PSHH! HEAR ME NOW?
iTrader: (3)
Originally Posted by trochoid
AC lines are different on some models due to using different brands of ac compressors on the dealer installed ac kits. Even the 2nd gens have that issue with factory installed ac using 2 different brands of compressors and line sets..
Mounting brackets are intechangeable, as are the ac lines and compressor lines to the firewall and condensor. You need the lines that came with each different compressor.
Mounting brackets are intechangeable, as are the ac lines and compressor lines to the firewall and condensor. You need the lines that came with each different compressor.
Ok. But can I use my AC compressor and lines with the PS/AC bracket from the GSL-LE?
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM