When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The clip for my hood prop rod finally let go and while the Mazda part appears to be available, I just didn't want to wait. I found this on Thingiverse that fits an FC and claims to also fit the 84/85 FB.
I have an 83 (don't know if 84/85 are different) but I can say that to fit an 83 you'll need to re-scale to 83%. I used PLA with an infill of 70% and it seems compliant enough to click into the bodywork and to flex capturing the rod.
The clip for my hood prop rod finally let go and while the Mazda part appears to be available, I just didn't want to wait. I found this on Thingiverse that fits an FC and claims to also fit the 84/85 FB.
I have an 83 (don't know if 84/85 are different) but I can say that to fit an 83 you'll need to re-scale to 83%. I used PLA with an infill of 70% and it seems compliant enough to click into the bodywork and to flex capturing the rod.
Dang I wish I knew this existed before I made my own, it sure looks janky compared to this one but it works so it's ok. I still need a rubber grommet for the other side of the hood prop.
