1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

1983 Fuel tank question

Thread Tools
 
Search this Thread
 
Old Oct 26, 2019 | 02:46 PM
  #1  
thirteenbees's Avatar
Thread Starter
Full Member
 
Joined: Nov 2015
Posts: 103
Likes: 9
From: Victoria B.C
1983 Fuel tank question

Looking to replace the fuel tank on my 83, it has a space saver tire. Will the 84-85 tank fit?
Cheers
Reply
Old Oct 27, 2019 | 08:25 AM
  #2  
WJM ROTARIES's Avatar
Rotary Freak
Tenured Member: 10 Years
 
Joined: Aug 2012
Posts: 2,871
Likes: 407
From: MELBOURNE AUSTRALIA
It should be the same 84-85 had space saver to
Reply
Old Oct 28, 2019 | 06:25 PM
  #3  
thirteenbees's Avatar
Thread Starter
Full Member
 
Joined: Nov 2015
Posts: 103
Likes: 9
From: Victoria B.C
That's what I thought but my research hadn't been able to verify it as a fact.
This will also provide me with the opportunity to install a larger fuel line to feed the 13b.
Thanks bro...
Reply
Old Oct 29, 2019 | 02:55 PM
  #4  
aeenox's Avatar
Senior Member
Tenured Member: 10 Years
Liked
Loved
Community Favorite
 
Joined: Jul 2013
Posts: 339
Likes: 27
From: Los Angeles
Is this the fuel filter

Hey guys,

Mines a 83 is this the fuel filter? I bought a new one to replace it. It just looks way different from the little filter I bought.


Thanks!!

Last edited by aeenox; Oct 29, 2019 at 03:00 PM.
Reply
Old Oct 29, 2019 | 03:08 PM
  #5  
GSLSEforme's Avatar
ancient wizard...
Tenured Member 05 Years
 
Joined: Sep 2014
Posts: 2,335
Likes: 262
From: Maryland

Some modifications done there,original pump and filter gone. Post a pic that includes all of the fuel pump. What kind of carb is on car,pressure regulator in engine compartment? Did you buy an RX7 specific fuel filter?

Pic of oe type fuel filter that came on the car,what you have circled in red in that picture is check/cut/rollover valve. Is there a fuel filter forward of the pump that is 1/2 in picture?

Post underhood pic of fuel lines/carb.

Last edited by GSLSEforme; Oct 29, 2019 at 03:31 PM. Reason: added pic
Reply
Old Oct 29, 2019 | 03:29 PM
  #6  
aeenox's Avatar
Senior Member
Tenured Member: 10 Years
Liked
Loved
Community Favorite
 
Joined: Jul 2013
Posts: 339
Likes: 27
From: Los Angeles
I'll get a picture later when I get home. I am running a weber 48 ida with a redline fuel pressure regulator in the engine bay and redline fuel pump.

The fuel filter I got a autozone it looks like this:



What is that part I have circled then? It looks like it might be a fuel filter. It also looks OEM which means it has never been replaced!

I had a 85 GSL-SE and that fuel filter looks way different due to it being fuel injected I am assuming.

Last edited by aeenox; Oct 29, 2019 at 03:33 PM.
Reply
Old Oct 29, 2019 | 03:38 PM
  #7  
GSLSEforme's Avatar
ancient wizard...
Tenured Member 05 Years
 
Joined: Sep 2014
Posts: 2,335
Likes: 262
From: Maryland
In my previous post i identified it as check/cut/rollover valve. It is original and it is not to be replaced. It is designed to stop the flow of fuel if car rolls over in an accident.
Appears a lot of your fuel system is oe.More pics of undercar and fuel lines/regulator in engine compartment. I would hope there is a fuel filter at some point in the car.
Reply
Old Oct 30, 2019 | 11:57 AM
  #8  
Ckforker's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
Liked
Loved
Community Favorite
 
Joined: Mar 2014
Posts: 801
Likes: 125
From: Cape Charles, VA
I just did my fuel system rebuild and that valve just has a marble in it, probably right on rollover protection.

Not really anything to break, so I put it back on.
Reply
Old Nov 9, 2019 | 08:34 PM
  #9  
thirteenbees's Avatar
Thread Starter
Full Member
 
Joined: Nov 2015
Posts: 103
Likes: 9
From: Victoria B.C
Have tank awaiting other parts...

also note 83 fuel level sender fits 84-85 tank.
Reply
Old Nov 10, 2019 | 10:52 AM
  #10  
peejay's Avatar
Old [Sch|F]ool
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: May 2001
Posts: 12,865
Likes: 572
From: Cleveland, Ohio, USA
Originally Posted by thirteenbees
Looking to replace the fuel tank on my 83, it has a space saver tire. Will the 84-85 tank fit?
Cheers
Signs point to no. Apparently the chassis rail width changed between Series 2 and Series 3, so the tanks don't swap over.

Ran into this when I needed a tank for my '81. I was willing to pull the tank out of my '84 and convert it to an under car mounted fuel cell, I was getting so desperate. And then I found one and the car was on the road within two weeks, after staring at the car for almost three years...
Reply
Old Nov 11, 2019 | 01:00 PM
  #11  
LouisR503's Avatar
Full Member
Tenured Member: 5 Years
Liked
Loved
Community Favorite
 
Joined: Mar 2019
Posts: 100
Likes: 0
From: Valparaiso IN
Originally Posted by aeenox
I'll get a picture later when I get home. I am running a weber 48 ida with a redline fuel pressure regulator in the engine bay and redline fuel pump.

The fuel filter I got a autozone it looks like this:



What is that part I have circled then? It looks like it might be a fuel filter. It also looks OEM which means it has never been replaced!

I had a 85 GSL-SE and that fuel filter looks way different due to it being fuel injected I am assuming.
Nope, that's the right fuel filter you bought. The placement of the fuel filter is down the line of the fuel pump, which I believe is the pink thing in the picture you posted. It should look similar in snape to the one you bought, but its probably dirtier
Reply
Old Nov 11, 2019 | 01:48 PM
  #12  
peejay's Avatar
Old [Sch|F]ool
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: May 2001
Posts: 12,865
Likes: 572
From: Cleveland, Ohio, USA
The correct fuel filter is a straight canister that clips in to the backside of the fuel pump bracket.
Reply
Old Nov 11, 2019 | 08:12 PM
  #13  
thirteenbees's Avatar
Thread Starter
Full Member
 
Joined: Nov 2015
Posts: 103
Likes: 9
From: Victoria B.C
Originally Posted by peejay
Signs point to no. Apparently the chassis rail width changed between Series 2 and Series 3, so the tanks don't swap over.

Ran into this when I needed a tank for my '81. I was willing to pull the tank out of my '84 and convert it to an under car mounted fuel cell, I was getting so desperate. And then I found one and the car was on the road within two weeks, after staring at the car for almost three years...
Thanks peejay, Crawled under the car with the new tank it fits very well,looks like slightly longer bolts will be required for the straps.
The 83 must be closer to the 84-85 than the 81s...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dgeesaman
3rd Generation Specific (1993-2002)
4
Oct 8, 2007 05:53 AM
Seventh Heaven
2nd Generation Specific (1986-1992)
8
Aug 28, 2006 10:56 PM
therotaryrocket
1st Generation Specific (1979-1985)
17
Jan 11, 2006 11:16 AM
piston pounder
1st Generation Specific (1979-1985)
10
Jul 2, 2002 12:24 AM




All times are GMT -5. The time now is 07:48 AM.