12a front cover advise needed.
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Pleasant Hill. U.S.A.
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
12a front cover advise needed.
I know for the 2nd gen. Mazdatrix recommends not to install the gasket on some models and just use the o-ring. Is this the best setup for 1st gens also? I'm having an oil pressure problem and think the o-ring is not sealing properly. Basically if you read the Mazdatrix troubleshooting on the 86-92 oil pressure problem. That's exactly what mine is doing. Need advise for this weekend!!!
#3
Full Member
Thread Starter
Join Date: Mar 2001
Location: Pleasant Hill. U.S.A.
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I just got off the phone with them and they said the same thing. No gasket. So I should see like 40 psi at idle and 80-90 4k, with shimmed regulators and the 17-17.5mm pump right?
Thread
Thread Starter
Forum
Replies
Last Post