12A and 13B flywheel differences?
11-02-04, 02:03 AM
#1
V8 RX-7
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: BC Canada
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
12A and 13B flywheel differences?
Does anyone know if the 12A (GSL) and 13B (GSL-SE) flywheels are interchangable?
Also, what is the best method of removing the flywheel from the shaft? I have the 54mm nut off but the flywheel just won't budge, even with a 2.5ft pry bar.
Thanx in advance, Jon
Also, what is the best method of removing the flywheel from the shaft? I have the 54mm nut off but the flywheel just won't budge, even with a 2.5ft pry bar.
Thanx in advance, Jon
11-02-04, 08:49 AM
#4
Racingbeat dealer
Join Date: Dec 2002
Location: Uden (AFB Volkel), The Netherlands
Posts: 787
Likes: 0
Received 1 Like
on
1 Post
I read the nut is off, but the flywheel won't come off....
put the nut back on for only a couple of threads....
Then take a large rubber hammer and give the flywheel a big slam on the clutch side.... it will sound "bling" until you hear the pitch change and then it will pop off....
put the nut back on for only a couple of threads....
Then take a large rubber hammer and give the flywheel a big slam on the clutch side.... it will sound "bling" until you hear the pitch change and then it will pop off....
Thread
Thread Starter
Forum
Replies
Last Post
