*** 1st Gen 1/4 Mile Leader Board ***
I ran at Portland International raceway with my stock 85 12A on Proxes. I did a 16.9 @ 82mph with a RT of .16 . This was my first drag race and my RT was pretty good. I just need to get this Streetported so I can run faster!
Sk8r_dude ----------------------------- 14.87 @ 96.4 ------------------------------ 85 GS, 13B 6 port, Stockport (I believe), racingbeat aircleaner, holly 600 cfm carb, racingbeat intake, racing beat header, custom exhaust, accel race wires, NGK plugs, electric fan, 83 LSD, 14 inch rims, sumitomo HTR 200 205/60/14s
Joined: Apr 2004
Posts: 692
Likes: 0
From: Runnemede, New Jersey
I was at the track last thursday and here are my numbers
I got two runs in
1st run 11.37 @ 123 with a 1.70 60ft.
2nd run 11.40 @ 121 with a 1.48 60ft. Missed 3rd gear
And then they told me not to come back until I get a Cage...
STREET CAR
S4 Turbo II motor Street port
Ford 8.8 rear
Street Radials
14lbs boost
I got two runs in
1st run 11.37 @ 123 with a 1.70 60ft.
2nd run 11.40 @ 121 with a 1.48 60ft. Missed 3rd gear
And then they told me not to come back until I get a Cage...
STREET CAR
S4 Turbo II motor Street port
Ford 8.8 rear
Street Radials
14lbs boost
I just took my daily driver GSL-SE to the strip to see what it would do currently.
Couldnt get a 60 foot to save my ***!
60ft- 2.28
1/4 mile- 14.24@ 100.2
Mods-
Street port converted to n/a 13Bre, custom header, msd 6al with FC coils. Haltech F10a fuel computer.
Couldnt get a 60 foot to save my ***!
60ft- 2.28
1/4 mile- 14.24@ 100.2
Mods-
Street port converted to n/a 13Bre, custom header, msd 6al with FC coils. Haltech F10a fuel computer.
Last time i went to the track i got 14.6 consistently and my best was
14.541 @ 93
1.96 60'
12A all rotor, Mild SP, Falken street tires, 8 lb flywheel, ACT clutch, 4.44 lsd rear end, Full exhaust, k&n filter, heating ducting ram air, etc
14.541 @ 93
1.96 60'
12A all rotor, Mild SP, Falken street tires, 8 lb flywheel, ACT clutch, 4.44 lsd rear end, Full exhaust, k&n filter, heating ducting ram air, etc
Joined: Apr 2004
Posts: 692
Likes: 0
From: Runnemede, New Jersey
NEW TIME!!!!!!!!!! UP DATE!!!!!!
Well i finally broke the 10's at ATCO this past Friday....
Just bought slick for the car..
DWRX7
10.84 at 123 MPH
with Slicks
Street port
13b S4 Turbo
Street Car Full exhaust 3in to muffler
Microtech LT10
8.8 rear
Well i finally broke the 10's at ATCO this past Friday....
Just bought slick for the car..
DWRX7
10.84 at 123 MPH
with Slicks
Street port
13b S4 Turbo
Street Car Full exhaust 3in to muffler
Microtech LT10
8.8 rear
Joined: Apr 2004
Posts: 692
Likes: 0
From: Runnemede, New Jersey
I have a video of the run.. My buddy has to convert it to put it on the computer...
I was boosting 14 lbs with street radial previous to this time at the track and it ran a 11.37 and 14 lbs on the street (it is a street car).. I wrap the down pipe the day before and put a set of slicks on the car.. I forgot to put the wastegate vacume hose back on so i was boosting over 20 lbs. it also was pump gas... I had to let off three time came too close to the wall and the center.. and to top it off I do not have cage...
I have a R85 turbo kit..
Another thing, the second run I broke the rear plate at the dowel pin near the oil filter because of the high boost and the motor was not pinned.
I will take a pics of the time sheet.. i will post it later on tonight... If you have any other questions PM me...
DWRX7
I was boosting 14 lbs with street radial previous to this time at the track and it ran a 11.37 and 14 lbs on the street (it is a street car).. I wrap the down pipe the day before and put a set of slicks on the car.. I forgot to put the wastegate vacume hose back on so i was boosting over 20 lbs. it also was pump gas... I had to let off three time came too close to the wall and the center.. and to top it off I do not have cage...
I have a R85 turbo kit..
Another thing, the second run I broke the rear plate at the dowel pin near the oil filter because of the high boost and the motor was not pinned.
I will take a pics of the time sheet.. i will post it later on tonight... If you have any other questions PM me...
DWRX7
Finally made it to a 1/4 mile.
Run from yesterday at Steele, AL.
1985 RX-7 GSL-SE w/S4 TII swap stock turbo with 3" intake and open 3
" downpipe, untuned Microtech LT10s, and Drag Radials.
R/T... .762
60'....2.015
330'...5.726
1/8...8.70
MPH...82.54
1/4...13.394
MPH...104.85
Run from yesterday at Steele, AL.
1985 RX-7 GSL-SE w/S4 TII swap stock turbo with 3" intake and open 3
" downpipe, untuned Microtech LT10s, and Drag Radials.
R/T... .762
60'....2.015
330'...5.726
1/8...8.70
MPH...82.54
1/4...13.394
MPH...104.85





