GTX35 compressor with a p-trim 1.15 turbine, what to expect?

Reply Subscribe

Thread Tools

Search this Thread

Apr 20, 2011 | 03:49 PM

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

GTX35 compressor with a p-trim 1.15 turbine, what to expect?

So I'm having a custom turbo built with a GTX35 Billet Compressor wheel mated to a P-trim turbine with a 1.15 a/r divided housing. Ball Bearing CHRA.

Basically what you guys know as a GT3574 or TD61 but with the new GTX billet wheel.

It will be installed using a divided manifold with dual dumped gates and 3 1/2" DP and exhaust. Ported Xcessive LIM, Ported S8 UIM, 850/2000 injectors.

PFC, HKS TP, pre-turbo water injection, etc. ON STOCK PORTS NEVER OPENED ENGINE

So my plan is to tune up to 25psi or if I dare 30? I'm in PR so I'm sure to find a crazy tuner that will do it. Normally driving at 15 as low boost setting.

So, what do you guys think? What to expect from this setup on stock ports?

Apr 20, 2011 | 04:34 PM

arghx

rotorhead

iTrader: (3)

Joined: Aug 2004

Posts: 16,205

Likes: 461

From: cold

Just looking at the compressor maps you would expect T04Zish power with T4 GT35 spool

Apr 20, 2011 | 04:47 PM

mannykiller

Garage Hero

iTrader: (93)

Joined: Aug 2009

Posts: 4,205

Likes: 19

From: Quartz Hill

Just out of curiosity....How many miles are on your "never opened motor,"?

Apr 20, 2011 | 06:01 PM

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

about 60k, I tested compression at 100psi give or take in all faces

Apr 20, 2011 | 07:25 PM

Turblown

Turn up the boost

iTrader: (12)

Joined: Dec 2001

Posts: 7,174

Likes: 236

From: Twin Cities, MN

Quote:

Originally Posted by arghx

Just looking at the compressor maps you would expect T04Zish power with T4 GT35 spool

Pretty much our thoughts too. Will post pictures soon.

That would be awesome to see 30 psi on this thing...

__________________
Rotary Performance Parts

Apr 20, 2011 | 07:38 PM

BOOSTALMIGHTY7

Full Member

iTrader: (1)

Joined: Apr 2008

Posts: 220

Likes: 1

From: Georgia

Apr 21, 2011 | 05:12 AM

NYRX7

Full Member

Joined: Apr 2004

Posts: 166

Likes: 0

From: NY

Nice! This sounds very similar to my set up except I have the older t4 35/40. 3'' exhaust , wai, and am waiting to recieve my excessive lim . This should be a pretty close comparison between turbos.

Trending Topics

New here. Not new to Rx7.

11

343
Hello from the Oregon Coast

8

211
Driving my new FC 7 hours home

7

342
Help needed - VERY weird electrical gremlin

10

317
I struck gold

6

260

Apr 24, 2011 | 12:55 AM

Turblown

Turn up the boost

iTrader: (12)

Joined: Dec 2001

Posts: 7,174

Likes: 236

From: Twin Cities, MN

Not really much to look at... But here she is..

Incase anyone is interested you basically have to buy a complete GTX35R, then a BB or journal bearing P trim CHRA less compressor wheel/housing/back-plate from us in order for us to make this combo... Not cheap, but if you money is of no concern, should be quite possible one of the best street 2 rotor turbos...

Attached Thumbnails

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-gtx35rptrim.jpg

__________________
Rotary Performance Parts

Apr 24, 2011 | 10:54 AM

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

YES! Can't wait! I'll post more pics once I get the whole setup ready

Apr 24, 2011 | 08:32 PM

#10

evodan2004

Junior Member

Joined: Sep 2010

Posts: 15

Likes: 0

From: new jersey

i think these turbo's ''GTX'' and the new BW EFR turbos will really push the limits of ''small'' frame turbo's.

May 9, 2011 | 09:25 AM

#11

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

Got the turbo today!!! I'll post more pics later

May 10, 2011 | 08:16 PM

#12

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

Pics

check the nice machined custom back plate

Attached Thumbnails

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-1.jpg

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-2.jpg

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-3.jpg

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-4.jpg

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-5.jpg

May 10, 2011 | 08:27 PM

#13

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

compared to normal GTX3582R - I don't have housings for it though and it's FS if anyone wants it!

note the center sections size difference and the p-trim has a taller turbine spacer

also note the difference in the turbine impellers, the p-trim is shorter front to back but has a larger diameter and the exducer is flat while the gtx35 has an angle to it...

an yes, I somehow balanced them like that for the pic.

sorry for the crappy quality, all I have is a celphone camera!

Elliot at Turblown did a great job with this turbo and also communication is top notch!

Attached Thumbnails

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-6.jpg

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-7.jpg

GTX35 compressor with a p-trim 1.15 turbine, what to expect?-8.jpg

May 10, 2011 | 09:53 PM

#14

70ghiavert

Full Member

Joined: Jul 2004

Posts: 69

Likes: 0

From: Florida

Very nice!

May 11, 2011 | 09:38 AM

#15

just startn

Turbo vert

iTrader: (33)

Joined: Aug 2005

Posts: 2,698

Likes: 2

From: Elyria, OH

Nice. Last pic is kinda dangerous lol

May 17, 2011 | 06:36 PM

#16

the_glass_man

Will u do me a kindness?

iTrader: (2)

Joined: May 2001

Posts: 5,030

Likes: 4

From: Parlor City, NY

Get that thing on and get some numbers!

May 23, 2011 | 08:37 PM

#17

vmarx7@yahoo.com

Senior Member

iTrader: (37)

Joined: Oct 2007

Posts: 389

Likes: 2

From: mass

May 24, 2011 | 07:59 PM

#18

robx7fcna

Reunited with the 13b

Joined: Mar 2001

Posts: 64

Likes: 0

From: Langley, BC

wow, thats sexy! Keep us posted!

Aug 1, 2011 | 01:06 PM

#19

dabigesii

Back to basics

iTrader: (4)

Joined: Mar 2004

Posts: 855

Likes: 12

From: Crescent City

any update on this?

Aug 1, 2011 | 02:34 PM

#20

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

I'm still waiting on these to arrive:

DP, Mani, Lines
CJM Fuel System

so can't do much yet...

Aug 1, 2011 | 09:31 PM

#21

Havoc

Rotary Enthusiast

Joined: Aug 2004

Posts: 1,326

Likes: 9

From: Australia - Perth

Any reasons why your not going the 1.05 a/r ? thinking it will choke up on the higher boost level's ?

would be awesome on the 15psi daily driving id expect.

Aug 1, 2011 | 10:31 PM

#22

neit_jnf

Thread Starter

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2003

Posts: 4,057

Likes: 262

From: Around

it was recommended by Elliot from Turblown when he built it. Less restriction, better potential.

I figure if I had this turbo built I want to test it to its potential and not restrict it. It's going on a stock-ported engine so it'll be really interesting to see the results I get.