Wolf 3D Need a map for a stock 13B-RE.
#1
Need a map for a stock 13B-RE.
Anyone got a decent map for a V500 that will run a stock 13B-RE?
I'll just be running the stock twins in parallel, but other than that and an FMIC it will be factory. Just need something to get it running and build a map off of.
Thanks!
I'll just be running the stock twins in parallel, but other than that and an FMIC it will be factory. Just need something to get it running and build a map off of.
Thanks!
#2
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
I dont have one, however if i was in your boat id probably find a FD fuel and ignition map and start there
What are you running for coils? does the v500 support the stock trailing ignitor?
What are you running for coils? does the v500 support the stock trailing ignitor?
#4
Shooting for 500
iTrader: (3)
I think your best option is to use a plug in S5 map and go from there. I think the S5 turbo only flowed about 20 cfm. If the cosmo twins do much more there may need to be a lot of adjustments on the fuel side in boost, but S5 timing should start it. S5 timing started my 13bre, but it was street ported with 850 primaries so fuel was way off.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
befarrer
Microtech
3
08-22-15 05:52 PM