Need a map for a stock 13B-RE.
 

Anyone got a decent map for a V500 that will run a stock 13B-RE?

I'll just be running the stock twins in parallel, but other than that and an FMIC it will be factory. Just need something to get it running and build a map off of.

Thanks!

I dont have one, however if i was in your boat id probably find a FD fuel and ignition map and start there

What are you running for coils? does the v500 support the stock trailing ignitor?

Engine-wise the 13B-RE is actually a lot closer to the 13B-T than the 13B-REW. You can actually run one on a stock Turbo II ECU. I was thinking about just using one of those maps to get started.

I think your best option is to use a plug in S5 map and go from there. I think the S5 turbo only flowed about 20 cfm. If the cosmo twins do much more there may need to be a lot of adjustments on the fuel side in boost, but S5 timing should start it. S5 timing started my 13bre, but it was street ported with 850 primaries so fuel was way off.