PLZ STICKY. Steve Kan Tuning week of SS8!!!
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
any more intrest???
-Roman
ima start posting in other sections soon to get the word out because i think its going to happen.. im going to call steve tomorrow and make sure he doesnt plan anything. also, im going to check out the dyno either this weekend or next week.
Thanks.
-Roman
ima start posting in other sections soon to get the word out because i think its going to happen.. im going to call steve tomorrow and make sure he doesnt plan anything. also, im going to check out the dyno either this weekend or next week.
Thanks.
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
Originally Posted by rx74ray
Please put me down for the Friday 10/7, the last spot. I'm driving from SF, so I should be there by then. 

ok, as long as you are sure youll make it. at this point, im going to put a deposit on the dyno in a week or so and will start collecting deposits...
10/6
1. Eep
2.
3.
4.
?5. XXXXXXX removed
10/7
1. BicuspiD
2.
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. atihun
4. SmogSUX
damn...If i could get my to4S, injectors, and ignition amp in on time i would definately be in for it. i can get the injectors and amp soon, but some one want to sponsor me that turbo? no? =*(
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
10/6
1. Eep
2.
3.
4.
?5. XXXXXXX removed
10/7
1. BicuspiD
2. stevemack (request for last spot) ??
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. atihun
4. SmogSUX
so he is the first on the waiting list....
1.stevemack
2.
3.
4.
5. MAX CAPACITY
so 3 more will be available depending on if we get all 3. im going to talk to the guys for the dyno on friday or early next week. then, ill start collecting deposits of $200 to cover the dyno charge and the rest will be collected 2 or 3 weeks prior to cover Steve's expenses
Thanks!
1. Eep
2.
3.
4.
?5. XXXXXXX removed
10/7
1. BicuspiD
2. stevemack (request for last spot) ??
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. atihun
4. SmogSUX
so he is the first on the waiting list....
1.stevemack
2.
3.
4.
5. MAX CAPACITY
so 3 more will be available depending on if we get all 3. im going to talk to the guys for the dyno on friday or early next week. then, ill start collecting deposits of $200 to cover the dyno charge and the rest will be collected 2 or 3 weeks prior to cover Steve's expenses
Thanks!
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
10/6
1. Eep
2. dcrosby
3.
4.
?5. XXXXXXX removed
10/7
1. BicuspiD
2. stevemack (request for last spot) ??
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. atihun
4. SmogSUX
so he is the first on the waiting list....
1.stevemack
2. dcrosby
3.
4.
5. MAX CAPACITY
ok, 2 more and were officialy sold out
make that 1 more...
1. Eep
2. dcrosby
3.
4.
?5. XXXXXXX removed
10/7
1. BicuspiD
2. stevemack (request for last spot) ??
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. atihun
4. SmogSUX
so he is the first on the waiting list....
1.stevemack
2. dcrosby
3.
4.
5. MAX CAPACITY
ok, 2 more and were officialy sold out
make that 1 more...
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
ok, im pm'ing people for the $200 deposit... i have to go talk to the dyno guy's and reserve the dates for the dyno. once all that is in, i will post more info here...
i hope to have everything ready to go by the end of the month..
Thanks...
i hope to have everything ready to go by the end of the month..
Thanks...
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
ok, just updating the list.. im going to pay the deposit for the dyno either tomorrow or the end of the week...
Thx
10/6
1. Eep
2. dcrosby
3.
4.
10/7
1. BicuspiD
2. stevemack (request for last spot) ??
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. djfamousa (atihun flaked.. replaced)
4. SmogSUX
Thx
10/6
1. Eep
2. dcrosby
3.
4.
10/7
1. BicuspiD
2. stevemack (request for last spot) ??
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. djfamousa (atihun flaked.. replaced)
4. SmogSUX
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
ok guy's here is the updated dates. i need you guy's to let me know when i should receive the deposits. i only received one and am expecting the others.
again, if any of you have any questions or need help about the tuning or anything, feel free to contact me as i have done it before..
heres the updated list
10/6
1. Eep
2. dcrosby
3.
4. stevemack (moved from friday. last spot)
10/7
1. BicuspiD
2.
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. djfamousa (atihun flaked.. replaced)
4. SmogSUX
again, if any of you have any questions or need help about the tuning or anything, feel free to contact me as i have done it before..
heres the updated list
10/6
1. Eep
2. dcrosby
3.
4. stevemack (moved from friday. last spot)
10/7
1. BicuspiD
2.
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. djfamousa (atihun flaked.. replaced)
4. SmogSUX
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
UPDATE:
OK, i just came from the dyno and talked to Steve... so the dyno as of right now is reserved for 10/6, 10/7, and 10/9... we will stop adding people when we reach 12.. thats the max that we can do. i might do like one or two on stand by at most.
the location of the dyno will be given out to only people that are attending for a dyno tune. last time, we didnt have a lot of people there and were able to stick to the schedule somewhat. now on sunday, more people will come for sure becuase its after SS8 but the i have spoken to the guy's at the dyno and they said that the people that come to look will not be allowed to be near the dyno while tuning is in progress..
also, for anyone that is tuning a twin turbo setup, please pm me for additional requirements
thanks again guy's!
-Roman
OK, i just came from the dyno and talked to Steve... so the dyno as of right now is reserved for 10/6, 10/7, and 10/9... we will stop adding people when we reach 12.. thats the max that we can do. i might do like one or two on stand by at most.
the location of the dyno will be given out to only people that are attending for a dyno tune. last time, we didnt have a lot of people there and were able to stick to the schedule somewhat. now on sunday, more people will come for sure becuase its after SS8 but the i have spoken to the guy's at the dyno and they said that the people that come to look will not be allowed to be near the dyno while tuning is in progress..
also, for anyone that is tuning a twin turbo setup, please pm me for additional requirements
thanks again guy's!
-Roman
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
Sqeueeze me in for whenever. As of yet, i'm not shure if i'm doing twins or single. I don't even have an engine but let me know when I need to do the deposit. I'll start working on the car this weekend.
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
Originally Posted by GoRacer
Sqeueeze me in for whenever. As of yet, i'm not shure if i'm doing twins or single. I don't even have an engine but let me know when I need to do the deposit. I'll start working on the car this weekend.
pm'ed you the info. there is also someone else intrested so if both of you get the deposits in, your officialy in and we will start a waiting list or a stand by type thing...
again for the people that havent gotten in contact with me for when they are sending in the deposit, please do so....
thanks, Roman
Last edited by rzograbian; Aug 23, 2005 at 02:13 AM.
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
do there is 2 more people that seemed very intrested... they have dib's for those spots but its not sure yet until i receive a deposit. if anyone else that is intrested, please pm me.
10/6
1. Eep
2. dcrosby
3. <---- goracer???
4. stevemack (moved from friday. last spot)
10/7
1. BicuspiD
2. <---- Qball) ???
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. djfamousa (atihun flaked.. replaced)
4. SmogSUX
10/6
1. Eep
2. dcrosby
3. <---- goracer???
4. stevemack (moved from friday. last spot)
10/7
1. BicuspiD
2. <---- Qball) ???
3. Banis (>2pm)
4. rx74ray
10/9.
1. RxHeaven
2. Tekno
3. djfamousa (atihun flaked.. replaced)
4. SmogSUX
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
note:
the additional requirement for the people that have the stock twins is that they need to have a extra o2 sensor bung welded either to the end of the downpipe of the midpipe. last time, people that tuned with stock twins got it done for about 35-40.. its just a bolt with a hole in the middle. this is so that when Steve needs to hook up the wideband o2 sensor, he will have access to it easily.
thanks
the additional requirement for the people that have the stock twins is that they need to have a extra o2 sensor bung welded either to the end of the downpipe of the midpipe. last time, people that tuned with stock twins got it done for about 35-40.. its just a bolt with a hole in the middle. this is so that when Steve needs to hook up the wideband o2 sensor, he will have access to it easily.
thanks
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
Originally Posted by SmogSUX
deposit sent....damn I just realized I spelled deposit wrong in the email I sent you like 3 times...haha exhaust fumes gettin to me...but on a positive note my car runs 

cool!! and i got the deposit!
Thanks!
hey.... I didnt get a PM. Also I have a oz-diy-wb Ver 1.5 and Datalogit-FD3S installed in my car.... let me know if anything needs to be removed.
Sent you a pm on how to get the $$ to you
Sent you a pm on how to get the $$ to you
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
Originally Posted by rzograbian
note:
the additional requirement for the people that have the stock twins is that they need to have a extra o2 sensor bung welded either to the end of the downpipe of the midpipe. last time, people that tuned with stock twins got it done for about 35-40.. its just a bolt with a hole in the middle. this is so that when Steve needs to hook up the wideband o2 sensor, he will have access to it easily.
thanks
the additional requirement for the people that have the stock twins is that they need to have a extra o2 sensor bung welded either to the end of the downpipe of the midpipe. last time, people that tuned with stock twins got it done for about 35-40.. its just a bolt with a hole in the middle. this is so that when Steve needs to hook up the wideband o2 sensor, he will have access to it easily.
thanks
ok, got PM but need payment info and morning slot if possible.
Thread Starter
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
Originally Posted by GoRacer
End of downpipe "or" beginning of mid/cat pipe?
ok, got PM but need payment info and morning slot if possible.
ok, got PM but need payment info and morning slot if possible.
yes, thanks for the correction... its late and im working too hard


