Lets convince Rotary13B1...
Trending Topics
#8
Former Moderator. RIP Icemark.
Man... I thought you weren't a newbie... 1400+ posts and still clueless...
Cut off the first 1/4 inch of the FD key and presto... you have a FC key.
I use to use a jspec Efini key in my old 88 vert by that method... in fact I think I even posted up a thread in the 2nd gen section on how to back in early 2002.
.
.
Cut off the first 1/4 inch of the FD key and presto... you have a FC key.
I use to use a jspec Efini key in my old 88 vert by that method... in fact I think I even posted up a thread in the 2nd gen section on how to back in early 2002.
.
.
#10
Rotary Freak
iTrader: (8)
Just FYI, ILCO MZ16 vs MZ27.
Thickness
FC Keys-MZ16: 2.1mm
FD Keys-MZ27: 2.6mm
If Mark was able to cut a J-Spec key and use it on his FC, kudos. But YMMV on the ILCO branded blanks I use.
Steve, I just don't enough people wanting that logo for the FC, so it's probably not going to happen. Economies of scale. But if it was the 10th Anniversary Logo..
Thickness
FC Keys-MZ16: 2.1mm
FD Keys-MZ27: 2.6mm
If Mark was able to cut a J-Spec key and use it on his FC, kudos. But YMMV on the ILCO branded blanks I use.
Steve, I just don't enough people wanting that logo for the FC, so it's probably not going to happen. Economies of scale. But if it was the 10th Anniversary Logo..
#12
Former Moderator. RIP Icemark.
Just FYI, ILCO MZ16 vs MZ27.
Thickness
FC Keys-MZ16: 2.1mm
FD Keys-MZ27: 2.6mm
If Mark was able to cut a J-Spec key and use it on his FC, kudos. But YMMV on the ILCO branded blanks I use.
Steve, I just don't enough people wanting that logo for the FC, so it's probably not going to happen. Economies of scale. But if it was the 10th Anniversary Logo..
Thickness
FC Keys-MZ16: 2.1mm
FD Keys-MZ27: 2.6mm
If Mark was able to cut a J-Spec key and use it on his FC, kudos. But YMMV on the ILCO branded blanks I use.
Steve, I just don't enough people wanting that logo for the FC, so it's probably not going to happen. Economies of scale. But if it was the 10th Anniversary Logo..
See the FC lock cyls are really 2.5mm anyway... just they use a slightly thinner key. But maybe the ilcos are too big???
I'd do it again on my 10th AE if I didn't have a perfect set of OEM keys.
Thread
Thread Starter
Forum
Replies
Last Post