Custom Turbo Set-Up For Small Block Chevy!
#1
Full Member
Thread Starter
Join Date: Jul 2006
Location: FL
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Custom Turbo Set-Up For Small Block Chevy!
This is also posted on Ebay at:
http://cgi.ebay.com/ebaymotors/ws/eB...m=200184884605
I have stellar feedback there, so you can buy with confidence.
Hello,
What we have here is a CUSTOM Set-up NOT a kit to turbocharge a Chevy Small Block Engine! All items are a matched set, so they fit together.
Turbo is a T6 flange "large frame" Garrett GT42 turbo ( From Mike's Turbo Inc) (1.19 a/r hotside) This is a LARGE Turbo! This set-up is good for 1000+ Horse Power.
2.5" runners coming off the heads with the rear most one being 2" flaring up. Each side is vbanded to the crossover section that has a flex tube to keep from cracking and vibration.
T6 flange and 60mm vband wastegate outlet.
This set up will fit any Small Block Chevy.
It has been test fit, but NEVER run, so ALL of the parts are BRAND NEW!
I am selling because I am moving in a different direction. All parts again are BRAND NEW and never been used.
Please see the pictures as this is test fit to a Chevy 383, but this will fit any Small Block Chevy Set-Up.
A lot of time and money was put into making this!
Items are located right outside of Orlando Florida, so are available for onsite pick up or may be shipped. Shipping will be nicely and neatly packed so that nothing is damaged in shipping.Shipping will be based on ACTUAL Shipping based on buyers zip code.
If you have any questions about anything, or need some additional pictures of something specfic please email me at InnovativeWebInc@Aol.com
Note: Engine NOT Included
http://cgi.ebay.com/ebaymotors/ws/eB...m=200184884605
I have stellar feedback there, so you can buy with confidence.
Hello,
What we have here is a CUSTOM Set-up NOT a kit to turbocharge a Chevy Small Block Engine! All items are a matched set, so they fit together.
Turbo is a T6 flange "large frame" Garrett GT42 turbo ( From Mike's Turbo Inc) (1.19 a/r hotside) This is a LARGE Turbo! This set-up is good for 1000+ Horse Power.
2.5" runners coming off the heads with the rear most one being 2" flaring up. Each side is vbanded to the crossover section that has a flex tube to keep from cracking and vibration.
T6 flange and 60mm vband wastegate outlet.
This set up will fit any Small Block Chevy.
It has been test fit, but NEVER run, so ALL of the parts are BRAND NEW!
I am selling because I am moving in a different direction. All parts again are BRAND NEW and never been used.
Please see the pictures as this is test fit to a Chevy 383, but this will fit any Small Block Chevy Set-Up.
A lot of time and money was put into making this!
Items are located right outside of Orlando Florida, so are available for onsite pick up or may be shipped. Shipping will be nicely and neatly packed so that nothing is damaged in shipping.Shipping will be based on ACTUAL Shipping based on buyers zip code.
If you have any questions about anything, or need some additional pictures of something specfic please email me at InnovativeWebInc@Aol.com
Note: Engine NOT Included
#5
I only have 1.3liters
iTrader: (2)
Join Date: Mar 2006
Location: Manchester, TN
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't worry about it, at least you made an effort to correct...they just try to keep people from clogging up the Classifieds with all there E-bay listings.....nice setup BTW