My first dyno slip...
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Australia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
My first dyno slip...
Only performance mods are:
Microtech MT8 and Hand Controller
Apexi Air Filter
GFB Bleed Vavle
The Lower run is 7 PSI, higher is 10PSI.
Pretty happy considering the engine has never been re-built, or even out of the car.
SHould have a new exhaust in a couple of weeks, hoping for abother 40HP or so once that goes on.
Then basically performance is on hold while i sort out brakes/suspension.
Cheers,
Andrew.
#6
13B N/A POWA!
Join Date: Apr 2002
Location: Everywhere, WRLD
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
Very curious to see your mods as well. What's up with the TQ reading it's extremely lovely but how did you come up with that (**** it's like a rally super 7 or something ). The power curve is a bit weird though.
K-san
K-san
#7
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
it all depends on what gear the car is in. I also have a high torque figure for my TII it made 106 kw and 324 Nm of torque locked in 2nd.
Regards
Michael Smith
Regards
Michael Smith
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Australia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
As Mr Smith said, the torque is all dependant on what gear etc... I'll ask my tuner next time i see him (hopefully this weekend).
Ted: That was with a stock exhaust. Got my 3 inch turbo back put on last friday, hopefully have a new power figure by the end of the week... and maybe an explanation of the torque for you guys
Ted: That was with a stock exhaust. Got my 3 inch turbo back put on last friday, hopefully have a new power figure by the end of the week... and maybe an explanation of the torque for you guys
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM