Looking for some dyno sheets for peoples true high comp 6port turbos!

im close to finishing my build and im looking to see what im going to expect for numbers!
s4/s5 n/a blocks with turbo on it, not looking for anything with turbo rotors! stock or ported are welcome! thanks!

 

https://www.rx7club.com/time-slips-d...kblock-950971/

Also, check out Aaroncake's build. He made close to 400whp with a ported S4 NA motor at only 13 psi.

I'm running a S5 NA motor at around 10-12 psi through a 60mm turbo on pump gas. No dyno numbers, though.

 

i dont have my graph uploaded but my s5 6 port turbo with stock ports made 340 whp and 275 ftlbs on a bnr stage 2 on 12 psi. Steve Kan also tuned it

 

Whats your specs? If you dont mind!

 

What specs are you after? Stock port 6 port with port matched t2 lim and t2 uim and tb. Bnr stage 2 turbo. Microtech lt10-s standalone

 

Pump gas? AI? Trying to figure how much im gunna make with a 60-1 hybrid with pump gas at 10-15psi

 

I'm running 93 octane pump gas

 

thanks!

 

what apex seals are you guys using with these power figures?i´m wondering how much boost can regular atkins seals take.
im building a n/a s4 shortblock with pineapple racing large street port with a schwitzer s3 turbo (t04)

 

I'm running racing beat seals

 

I don't have sheets for mine yet either, curious what numbers people are getting.
In my 88 vert I have s4 n/a mild SP- I was told from guy i bought it from- stock s5 turbo, 550's and 720's, 2007 WRX TR fuel pump, Rtek 1.7, RB 3" DP- running 10 PSI not sure what numbers this would make, butt dyno maybe around 250

 

im hoping to be getting on the dyno here this summer some time . im runing a s4 6 port with s4 na 9.4 rotors with a mazdatrixs 6 port street port .holset hx-52 ,hks wastegate ,haltech e6k with 800/1600 combo and walbro 255 .i'll be running 12-14 psi after im done breaking in the motor .at 5psi right now anyone have a idea maybe . i just want to break the 420 mark