First time out Precision 6266
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Portland
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
First time out Precision 6266
Wanted to make a few passes to see what kind of MPH i could run. Was trying to launch to hard as i figured traction would be most difficult on street tires. Still i thought it did well. Run was on 16lbs of boost/ pump gas with water injection.
#3
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Portland
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Not sure on the power yet, have yet to make it to a dyno. I'm guessing a solid 400whp. Lol the 60' was horrible 2.6 was having a problem making the excedy triple disc slip enough to slow the power down. 67/65 is a big turbo you'll make some good power as long as you have the fuel and spark to support it 😀.
#4
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Portland
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
finally made a trip to mexico last night and ran in to a modified GTR running on E85.
https://www.instagram.com/p/BLB3AbnA...y=caseysmiller
https://www.instagram.com/p/BLB3AbnA...y=caseysmiller
#6
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Portland
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
That run was 12.4 at 122. But after a few runs I was able to run a 12.04 at 129 with a 2.3 second 60'. I also adjusted the boost to 19-20lbs in third and fourth gear only.
#8
Racing Rotary Since 1983
iTrader: (6)
having had a half day tour thru Precision's manufacturing/R&D facilities guided by their Chief Engineer i am very interested in any rotary app...
my question is what P 6266 are you running?
they offer a oldish school 6266
they offer a CEA 6266
the offer the GEN 2 6266.
nice runs BTW, it is always nice to see FDs on track.
Howard
my question is what P 6266 are you running?
they offer a oldish school 6266
they offer a CEA 6266
the offer the GEN 2 6266.
nice runs BTW, it is always nice to see FDs on track.
Howard
#9
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Portland
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Im running the gen2 6266 with a 1.15 rear housing.
https://instagram.com/p/BLB3AbnAq9i/
gtr on e85 650-700 whp
https://instagram.com/p/BLB3AbnAq9i/
gtr on e85 650-700 whp
having had a half day tour thru Precision's manufacturing/R&D facilities guided by their Chief Engineer i am very interested in any rotary app...
my question is what P 6266 are you running?
they offer a oldish school 6266
they offer a CEA 6266
the offer the GEN 2 6266.
nice runs BTW, it is always nice to see FDs on track.
Howard
my question is what P 6266 are you running?
they offer a oldish school 6266
they offer a CEA 6266
the offer the GEN 2 6266.
nice runs BTW, it is always nice to see FDs on track.
Howard
Last edited by 13Bseries; 10-05-16 at 11:45 AM.
Thread
Thread Starter
Forum
Replies
Last Post