Post Pics of your FD Wheel Fitment!!
#301
Senior Member
iTrader: (3)
Join Date: Dec 2004
Location: BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Figured I should post mine:
Weds SA67r gunmetalic wheels
Fronts: 19 x 9 + 35 offset with Bridgestone 255/30/19 RE050A RFT
Rears: 19 x 10 + 42 offset with Bridgestone 285/30/19 RE050A
Weds SA67r gunmetalic wheels
Fronts: 19 x 9 + 35 offset with Bridgestone 255/30/19 RE050A RFT
Rears: 19 x 10 + 42 offset with Bridgestone 285/30/19 RE050A
#302
Formerly widebodyseven
iTrader: (17)
Join Date: Jul 2009
Location: Garage
Posts: 1,799
Likes: 0
Received 0 Likes
on
0 Posts
#303
Failcopter..it's here..
iTrader: (6)
Join Date: Aug 2008
Location: near phoenix....kinda...
Posts: 721
Likes: 0
Received 1 Like
on
1 Post
https://www.rx7club.com/west-sale-wanted-classifieds-195/work-vs-kfs-18x9-18x10-fc-fd-aggressive-fitment-952008/
jsut incase anyone lookin for some mo wheel fitment haha.
and widebody.. u need to do something with your life man.. im loving that , i always hated 19s.. but ill take that . keep it up!! what size tires u using?
jsut incase anyone lookin for some mo wheel fitment haha.
and widebody.. u need to do something with your life man.. im loving that , i always hated 19s.. but ill take that . keep it up!! what size tires u using?
#304
Make an assessment...
iTrader: (3)
That doesn't look near as bad as I thought it would haha. I very briefly thought about trying that because I want to match my fronts to my rears as well, but I wasn't sure if it would work. You pulled it off pretty well! My only concern is it seems it lowers the fender a bit, to where you might have to raise the front so it won't rub. Can you tell much difference as far as that goes? I'd actually like to take some metal out of mine so that I can lower the front a bit more. Do you think that would be possible doing it this way?
#306
Rexxy
iTrader: (40)
https://www.rx7club.com/showthread.php?t=952008
jsut incase anyone lookin for some mo wheel fitment haha.
jsut incase anyone lookin for some mo wheel fitment haha.
Now that i got wheels
I was going to get the 18x10.5 526 with +25 and if im not wrong the lip is a lil bit wider than 4.25 i think its pretty close to the 5" but i dont remember well, they are not bad looking at all.
#307
Full Member
Join Date: May 2005
Location: washington
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I have been looking at the xxr 526 since they came out. I need some new dailey/street rims for the fd. 18x9 et35 for the front and 18x9 et25 w/ 10mm spacer in back would look good. Only problem is I havent seen them on ANY car besids the model car for the rims. Been checking other forums to find some for a while now to get some reviews.
#309
Formerly widebodyseven
iTrader: (17)
Join Date: Jul 2009
Location: Garage
Posts: 1,799
Likes: 0
Received 0 Likes
on
0 Posts
That doesn't look near as bad as I thought it would haha. I very briefly thought about trying that because I want to match my fronts to my rears as well, but I wasn't sure if it would work. You pulled it off pretty well! My only concern is it seems it lowers the fender a bit, to where you might have to raise the front so it won't rub. Can you tell much difference as far as that goes? I'd actually like to take some metal out of mine so that I can lower the front a bit more. Do you think that would be possible doing it this way?
Pics of the new wheels....
19x9.5 19x10.5 +0
Going with 265/35/19 and 235/35/19
It looks so funny how i still have the tabs sticking out on the fenders.
#311
Junior Member
Join Date: Jul 2007
Location: Ontario, Canada
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
ya i called xxr about the 526 and they sayed that they have 20'' 10.5's but no other size's available yet, i read on afew other forums and theres like a dozen of these guys that pre-ordered theses rims in variouse sizes, paid for them in december and they stll havent got them lol might keep looking for a other option
#316
Make an assessment...
iTrader: (3)
You're right it does lower the fender by a little but i don't know how it will look overall until i get tires and take the car of the jack stands. As for removing metal to lower the front more idk. If you want to remove metal and have the flared look you need to do a lot more custom fender work.
Wow, that is ballin! Love that. I almost went with these wheels actually.
And I'm liking this too haha. So tough looking. I keep forgetting to ask people that have these fenders, are they metal or FRP? I thought about doing something like this but I don't want to mold on body panels. If they are metal I'd think about cutting out and welding the rear fenders in though.
#317
Junior Member
Join Date: Jul 2007
Location: Ontario, Canada
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
c i really want a mesh style rim with a staggered fitment, 18'',275 in the back with a nice lip and whatever works in the front. this is the Ray's/advans i have on mine right now but i'm ready for a new style. i dont want to pay more than 2000 for rim's and tires. i'm thinking on the TSW snetterton's but those rims on the white fd are sick
#319
Junior Member
Join Date: Jul 2007
Location: Ontario, Canada
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
hey shifty how much did you pick up that spoiler for. Im painting my car this summer and trying to dicide if i want to even have a spoiler, but if i do i want that style. looks good and funtional
#324
Make an assessment...
iTrader: (3)
I have 18x9.5 +22 on the front and it's pretty much right on the stock fender, so you will be cutting it pretty close if that tire isn't stretched at all, and it doesn't look like it would be. May have to go +26 or +28 to be safe with that tire. But like Chepopain said, all depends on how low you want to go and how flush you want it. +24 would be pretty damn flush haha.
#325
Kenspec
iTrader: (16)
Join Date: Aug 2008
Location: Ancaster, ON, Canada
Posts: 1,231
Likes: 0
Received 2 Likes
on
2 Posts
I actually got a sweet deal on it. It was the find of the century for me, brand new APR GTC-300 Full carbon meant for a late model supra for $500 lol. I autocross more than I do full circuit but this year Im going to try more of it. I actually dont drive around with it on lol, only when competing. Too much heat