jparker7

iTrader: (1)

I have that same set up on my car except I have 275/40s on the rear. They fit perfect no rubbing issues. I have coilovers though and my car is lowerd about and inch and a half from stock.

unicorn_squad

I think the lip of the front wheel is going to be awfully close to the strut...

rear will fit, but that high of offset with that much of a stretch might look kinda funky... but yes it should fit. I would go with either some spacers, or a 245 or 255 next time you buy tires.

OJmobileII

read the first 20 pages and at that point it seemed like the jury was still out on this setup. some said yes, some said no. just want to see if any new experience info for the this combo. Will it fit?

17x8 +35, 245/40R17 All Around on KYB Adj and RSR Race Springs.

willing to roll fenders a bit and about 1* camber, if need be.

if they do fit, how would the fitment look? would the fronts stick out and rears be sunken?

hurleysurf24

iTrader: (3)

ill take pictures of my 17x8 +35 with 225/45/17 on the front

those 245 are not going to fit. i think with the lower height .. the max youd be able to fit is a 235 ... i have a 225/45 and i am about 4mm from the strut

OJmobileII

thanks. i appreciate it. i think it should fit w/ a small (5mm MAX) spacer and rolled lip, but i still dont know how i feel about putting on a spacer. some say not a good idea and others say that small is fine. what do you have on the back?

playdeadva

well im pretty dead set on some wheels just wanted to get a few opinions on size and offset. i used http://fc3spro.com/TECH/MODS/RT/rims.htm as my reference. sizes are FR 17x7.5 +32 R 17x9.5 +28. thanks for any help!

hurleysurf24

iTrader: (3)

OK without further ado .. heres my 17 x 8 35offset on the front (ill have pics of the rear when i throw them on later this week).

I have no rubbing issues whatsoever.

Black91n/a

Yea, but what tire size. Is that a 215? It doesn't look like a 225 to me.

hurleysurf24

iTrader: (3)

225/45/17 bf goodrich kdw 2

OJmobileII

Thank you for the pics. Looking forward to seeing the rears. I was going to try and run a little bit larger tire (245/40R17), so maybe I should put a 5mm spacer up front to help clear on the suspension? Have not searched yet, so I do not know how safe that would be???

hurleysurf24

iTrader: (3)

you will need atleast an 8mm spacer to keep it on the safe side

OJmobileII

thanks. have you gotten the rears on yet?

lovingthefc3s

iTrader: (2)

Ok, i have checked ReTed's offset guide but would like to know if anybody has or knows how this set-up would work..........

Intrax springs/Tokico HP shocks and
18'' by 8.5 20mm offset front,
and
18'' by 9.5 rear 25mm offset with 225/40 series tires all around?? Thanks,
-Dustin.

Black91n/a

You'll be hitting the fenders.

Roen

iTrader: (2)

15 x 7.5, +25 in the front
15 x 7.5, +10 in the rear

Stock Springs, what do you think?

lovingthefc3s

iTrader: (2)

well according to Reteds chart ...... http://www.fc3spro.com/TECH/MODS/RT/rims.htm
the rears are at the recommended offset and the fronts are at the minimum(flush look) but seem to work because I'm running 225 tires not 255. What do you guys think? A-Ok...or no??

Thanks,
-Dustin.

unicorn_squad

might need a little roll or camber. but not much. it should look nice.

unicorn_squad

should be fine depending on tire size.

Roen

iTrader: (2)

225/50/15?

unicorn_squad

that should fit. might need a little roll in back.

ARD T2

iTrader: (22)

My new setup for autox.

16x8 +32 and +25 with stock FENDERS and 245/45/16 all around WITH STANCE COILOVERS.



Peace, Rishie

wiL87

wow that looks soooo nice and clean^

ARD T2

iTrader: (22)

TY kind sir,

Rishie

melicha8

iTrader: (1)

Rishie you gotta come to the stockton autocross so I can see them in action. Maybe if I can get a test drive in them you might have a new customer.

ARD T2

iTrader: (22)

How about you come down to SFR, i'll be starting in May.

Then you can tell me what you think. We'll codrive it for a day.

Rishie