FD3S abs 3-4 channels swap
12-17-08, 05:54 PM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2008
Location: BALAD IRAQ>ny,ma,ct
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
FD3S abs 3-4 channels swap
The improvements to the new RX-7 lineup, in general, include modifications to the brake and suspension systems to enhance driving performance and handling stability. The interior features an instrument panel with white meters, metal plated frame rings, and red illumination for a more sporty look. The reinforced side impact bars and ABS equipped with an EBD (electrically-controlled braking distribution) system for all four wheels enhance safety.
has anyone swap there old USD ABS w/ 99+ or 2002 spirit R 4 channel brake system, i heard feed or panspeed did the swap on an older model FD rx7 anyinfo would be great!!
has anyone swap there old USD ABS w/ 99+ or 2002 spirit R 4 channel brake system, i heard feed or panspeed did the swap on an older model FD rx7 anyinfo would be great!!
12-17-08, 05:59 PM
#2
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2008
Location: BALAD IRAQ>ny,ma,ct
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Main Product Enhancements
Improved Braking Performance
- The ABS control unit for all four wheels has been upgraded from the conventional 8 to 16 bits and equipped with an EBD (electrically controlled braking distribution) system. This results in shorter stopping distances when the brakes are applied suddenly and enhanced vehicle stability.
Improved Braking Performance
- The ABS control unit for all four wheels has been upgraded from the conventional 8 to 16 bits and equipped with an EBD (electrically controlled braking distribution) system. This results in shorter stopping distances when the brakes are applied suddenly and enhanced vehicle stability.
12-17-08, 09:42 PM
#4
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2008
Location: BALAD IRAQ>ny,ma,ct
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
i think its worth it for street car! plus when im in japan in feb im parting out a few s8's so im just seeing who is interested and who my have done the swap here on the forum!
12-18-08, 02:59 PM
#6
Rotary Freak
ABS sensors won't be an issue. You may have problems integrating the various connectors to the other harnesses, which I think has been covered before for RHD cars, so the whole wiring shebang might be worth grabbing - if you have a hefty baggage allowance and are not into soldering.
There's two different looms running to the back depending on model as well...whether that's significant.
There's two different looms running to the back depending on model as well...whether that's significant.
Trending Topics
03-04-09, 02:11 PM
#8
Rotary Freak
Could be entirely due to duff sensors...they're all second hand.....have found the all plastic late model ones test consistently at 1.6k ohm, whereas the earlier ones, with the stainless steel rings, seem to run 1.0k ohm or thereabouts. So you may need to take my earlier statement regarding the wheel speed sensors with a grain of salt if continuing on with this project.
A knowledgeable local FD spare parts guy reckons they interchange according to "the book" - they do plug in and bolt on - and it may just be an exceptional run of bad luck on my part.
A knowledgeable local FD spare parts guy reckons they interchange according to "the book" - they do plug in and bolt on - and it may just be an exceptional run of bad luck on my part.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM
