Super AFC S-AFC2 Help
03-02-07, 08:00 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Mesquite Tx
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
S-AFC2 Help
i have a 91 non turbo it has an apexi safc2. the controller is hooked up and works but the settings a messed up. Does anyone know of a manuel for the settings and/or how to reset it. thanks
03-02-07, 08:34 PM
#2
King of the Loop
To reset it us the pr command to go all the way back to the main screen, choose settings. Then choose lo thrtl, use the joystick to go to each rpm poitn and use the dial to change the correction back to 0. Then hit nx and do the same for high thrtl.
I cant find an online manual right now though I did find one last month and printed it.
I cant find an online manual right now though I did find one last month and printed it.
03-02-07, 08:40 PM
#4
King of the Loop
Jackpot!! I found it on my desktop with a filename totally unrelated. Its too big to upload but If you give em your email ill send ti right away.
At the moment I have it leaned out 10% all across the board but you really shouldnt mess with that without a wideband gauge. Spend the money for na hour on a dyno (around $100 bucks) and set it up there.
At the moment I have it leaned out 10% all across the board but you really shouldnt mess with that without a wideband gauge. Spend the money for na hour on a dyno (around $100 bucks) and set it up there.
03-02-07, 08:47 PM
#5
Full Member
Join Date: Mar 2006
Location: CINCINNATI
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Don't have my manual anymore there are some out there on the net,settings are going to vary person to person unless they have dyno to figure out whats working and what's not,you really can't tell seat of your pants, n/a's tend to run rich up to a point so lean it out and go from there just don't go way lean,if ya tear up your stuff it's not my fault,remember unless your turbo/supercharged,lean makes power up to the point you start to hurt or destroy your engine so if your not comfortable,take it to a tunner w/dyno
03-02-07, 09:49 PM
#6
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Do a search for APEXI (Google). On their site they have all the manuals for all their devices.
I, in the last four weeks had that site listed on one of the posts in the SAFC Fourm................................that has since been deleted.
http://www.apexi-usa.com/support_installation.asp
I, in the last four weeks had that site listed on one of the posts in the SAFC Fourm................................that has since been deleted.
http://www.apexi-usa.com/support_installation.asp
03-02-07, 09:50 PM
#7
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Mesquite Tx
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
not your fault
my email is flagman248@sbcglobal.net
if i blow it up i wont blame you ill just blame it on the old lady like i always do. what settings do you have in the car info.
if i blow it up i wont blame you ill just blame it on the old lady like i always do. what settings do you have in the car info.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post