Help with FD, Houston area
#28
Red Neck Tony Stark - C2
iTrader: (1)
Well i charge 250 for a rebuild, that is labor only (That is you pulling the motor out of the car), parts are going to run you about 800-1200. If you bring me the motor not pulled aprat and i have to clean it, that is a extra 100 bucks to clean the parts.
Porting can be from 200-350 depending on what you want done, I dont do P-ports just Street to Bridge, if you want full bridge ports you have to get one peace apex seals
I will do everything, Pull the motor, rebuild, Replace the motor for 1000 + Parts.
If the motor is blown then you will have to find a new rotor and housing
Porting can be from 200-350 depending on what you want done, I dont do P-ports just Street to Bridge, if you want full bridge ports you have to get one peace apex seals
I will do everything, Pull the motor, rebuild, Replace the motor for 1000 + Parts.
If the motor is blown then you will have to find a new rotor and housing
Last edited by Rx7_Nut13B; 10-08-08 at 03:37 PM.