XS T04S Kit : What intakes are you using?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: x
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
XS T04S Kit : What intakes are you using?
Now that I've committed to the dark side....
Looking to get an intake next...
Looking at the K&N website at 4 inch round and 4 inch tapered filters...
Which ones are y'all using?
Any pics?
Looking to get an intake next...
Looking at the K&N website at 4 inch round and 4 inch tapered filters...
Which ones are y'all using?
Any pics?
#2
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: x
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Looks like it will have to be a tapered one...
They have a much larger 4 inch selection...
There are 7 choices with a 1 3/4 flange....
Can't do the 5/8 inch flange (too small for turbo)...
So.... which of the 7?
They have a much larger 4 inch selection...
There are 7 choices with a 1 3/4 flange....
Can't do the 5/8 inch flange (too small for turbo)...
So.... which of the 7?
#3
Banned. I got OWNED!!!
Hey I use the K&N 4 inch filter its' around 12 inches long, measures 6 odd inches at base and tapers down to 4 odd inches at end.
I used to use the 5 odd inch long K&N and found it too restrictive.
My turbo is on a custom exhaust manifold all designed to allow the largest air filter you can possibly fit into a first gen RX7
I used to use the 5 odd inch long K&N and found it too restrictive.
My turbo is on a custom exhaust manifold all designed to allow the largest air filter you can possibly fit into a first gen RX7
Thread
Thread Starter
Forum
Replies
Last Post