Run first out to 8 grand and speed shift to second. The tires will keep frying until you lift or grab third and you will get that gear as well. By the end of third you are at 90 or so MPH. Forth gear will take you to 130MPH quicker than ****.

 

next time tell the viper to try and bite you. i have a 04 and 01 and a 95 that i have to race when i get mine back and a sallean and a 89 turbo TA with a bunch done to it. i will spend the first week raceing all these cars it is going to be fun. there is all ways some one faster i think

 

PENNSYLVANIA

Axcelerated Motorsports
Model 248 Mobile Dynamometer
4095 Ferry Road
Plumsteadville 18949
Tel: 215-297-8139
Website: http://www.axceleratedmotorsports.com

Bobby Gerhart Racing
2400 East Cumberland St.
Lebanon 17042
Tel. 717-273-7995

Custom Cars by Koz.
1117 Lancaster Ave.
Reading 19607
Tel: (484) 256-5409

Diehl Paving
1712 Hoover Ave.
Allentown 18109
Tel: 610-264-7311

DL Automotive
2440 Commercial Ave.
State College 16801
Tel. 814-238-1578

Don's Performance Test & Tune
10020 Meadville St. Box 151
Cranesville 16410
Tel. 814-756-3432
Email: dynodon.pa@netzero.net

D.P. Inc. Dynojet Service
1712 Hoover Ave.
Allentown 18109
Tel: 610-264-7211

Indiana County Technology Center
441 Hamill Road
Indiana 15701
Tel. 724-349-6700

Interstate Motorsports
Model 248 Dyno with Air/Fuel, Diesel Capability
Interstate 81 and route 54 Exit 131B
Mahanoy City 17948
Tel: 1-866-773-1721

JD's Auto Repair & Performance
810 Welch Road
Huntingdon Valley 19006
Tel. 215-938-9270
Website: http://www.jds-high-performance.com/

Jerry D. Wayman
54 Reifsnyder Rd.
Royersford 19468
Tel: (610) 637-8900

Johnny Lightning
Model 224
25 Archery Road
New Providence 17560
Tel. 717-786-4670
Email: jlightningracing@cs.com

Kauffman Motorsports
901 Range End Road
Dillsburg 17019
Tel. 717-502-8880
Website: http://www.kauffmanmotorsports.com

KD Rotary
311 Industrial Drive
Nazareth 18064
Tel. 610-614-1214
Website: http://www.kdrotary.com

Mid State Products/Dynamo Motorsports
180 Silver Springs Road
Mechanicsburg 17050
Tel. 717-939-1391

Performance Specialties, Inc.
323 High Street
Pottstown 19464
Tel. 610-326-7000
Website: http://www.performancespecialties.com/

Phoenix Performance Inc.
481 Schuykill Road, Route 23 & 724
Phoenixville 19460
Tel. 610-482-0141

RaceKrafters Automotive Machine
1140 Dillerville Road
Lancaster 17601
Tel. 717-399-8780

Second Street Speed
109 S. Second St.
Perkasie 18944
Tel. 215-257-3724
Website: http://www.secondstreetspeed.com/default.htm

Seymore Performance
5 East Allen St.
Mechanicsburg 17055
Tel. 717-697-9763
Website: http://www.seymoreperformance.com/index.html

Strope Speed Shop
190 Murtland Avenue
Washington 15301
Tel. 724-228-1166
Website: http://www.stropespeedshop.com

World Racing
3000 Kutztown Road
Reading 19605
Tel. 610-939-9800

Xotic Motorsports
Models 248 & 224 AWD
999 Gap Newport Pike
Cochranville, PA 19330
Tel. 610-593-1130
Website: http://www.xoticmotorsports.com/


That's Dynojets, I can check for Mustangs too. Not sure if any of these are near you, but PA's no too big

 

Carl you'll be happy to know we bought a AWD dyno, I'm just trying to buy the building now

 

Congrats Sean... When do you guys think it'll be operational?
-Nic

 

Hopefully soon, I'm stuck finding a building at the moment.

 

zkeller,
if you are ever over here in Chester County you have to stop by, that setup sounds amazing!

Bob

 

I am going to start some tech question on the install now as once they get here and shipped to everyone I am sure more than just myself will have questions..

1. The valves or whatever that sit next to the secondary rail have lines that used to go the the rats nest... Do I cap these or let these vent?

2. When I remove the coolant lines from TB can I just cap them or do i need to make it a bypass and just skip the TB?

3. What all can I remove off the UIM? I am not worring about the emmisions... SHHHH!

4. Do I need to ground any off the unused harness's? The ones from all the seloniods I removed? Or acn I just leave them all be under mani? (running PFC)./

5. More to come!!!!

 

Damn the wait is killing me!! My turbos arent even making 15lbs anymore, LOL. I wonder what 500whp+ sub 2550lb curb weight feels like,,,;p

 

1) You can vent those.

2) You just bypass it completely

3) Everything I give you plates for is all youhave to remove, I do not have complete blockoff kits made. I can get them for you if you wish.

4)Ground any harness grounds if you are keeping the factory harness the car has horrible grounds as it is.

5) ???????

 

I just removed my rats nest, I removed all the solenoids coming off the harness. I am running a power FC. Just cap the coolant lines off, you dont need it anymore. It is simply amazing how much **** you can removed with a power FC and non sequential/single turbo. Id say, I removed 10 lbs EASY worth of hoses and random **** from the rats nest.

 

Just for kicks a buddy of mine and I went out on the public highway and from a 2nd gear float we lined up my car beside his Yamaha R6. His R6 has an exhaust.

We were dead even to 120 then I started pulling him. We left off at 140. Nothing to prove, just because he was curious.

Again, Friday July 11th there will be some dyno runs on here for this kit. I am going to do a 15lbs and a 22lbs pull. I my tweak with the timing once I see the hp and torque curve.

 

That is damn good, considering a 2nd gear roll isnt a high mph. When I race bikes I typically try to go from at least a 65-70mph roll. Nice job though, cant wait to see your dyno

 

not bad but i whould have thought you whould have pulled him a little faster than that but that is still a fast bike how much does he way?

 

also what boost where you at?

 

Well you have to remember if its a newer 600, with mods, they can go 10s. Also, it was a second gear roll, not exactly the best for a single turbo 7. I think a high 3rd gear punch would work out much better.

 

Hey, it was a comprimise. The rider of the bike weighs about 225. He's a tad on the chunky side. I weigh 205 and my passenger 175.

 

You had a passenger? LOL ...My best weight mod is me, I weigh 160;p

Most bike guys like lower mph rolls since they can eat up most cars. My friend will only race me from a 25-40mph roll, he wont do a 70 roll... btw he has a f4i

 

Anyways, Id hate to see my friend get his r85 he hasnt even ordered yet before I get my gt40r

any news, good or bad?

 

I think the only news you will get is by calling Sean..

I can say that I know a shop in CA that just got in (last week) a small shippment of gt40r's. He said they did not get all that were ordered just a hand full. That being said I would think the ball is starting to roll. I just hope the back ordered ones are not the same wait.

Boostedyellow7, got your pm. Sorry I did not get to reply. I think this answers your question...

 

Well hopefully if what you said is true, that the turbos are on their way. Im looking forward to racing my friends KB'ed 03 cobra

 

Any news yet? 3 months goin on 4...

 

Have you tried asking Sean?

 

Aspec just called me, guess they got the turbos in..yay...Now I can install my fuel system

 

Hopefully @ 20-22psi I can take out those pesky kbed 03 cobras...;p