what do u think of this turbo??
06-03-08, 06:11 PM
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2008
Location: tennessee
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
what do u think of this turbo??
im thinking of using this on a s4 t2 block thats bridgeported
per ebay add
This is a Garrett/Airesearch TV6102 turbo that was remanufactured by garrett and then bolted up to a big ported 13B rotary in a '91 rx7. The turbo was on the car for about a week, and then it got rearended and the owner decided to part everything out. The TV series was an update to the old T series, and this wheel is about the same size as the old T61 compressor wheel except it's more efficient. The inducer/exducer are 61.5mm and 86mm with a compressor a/r of .45. The turbine is 71.5mm/86mm, and the turbine housing a/r is 1.15. This hotside is perfect for a large ported and high RPM 13BT or 13BREW. The flow for this compressor is slightly more than the T61 and GT35R and flows about 68 lbs/min. Again, this has very little run time after it was remanufactured, is in GREAT shape, and has no excessive shaft play and spins great... no oil anywhere.
so do u suggest it?
per ebay add
This is a Garrett/Airesearch TV6102 turbo that was remanufactured by garrett and then bolted up to a big ported 13B rotary in a '91 rx7. The turbo was on the car for about a week, and then it got rearended and the owner decided to part everything out. The TV series was an update to the old T series, and this wheel is about the same size as the old T61 compressor wheel except it's more efficient. The inducer/exducer are 61.5mm and 86mm with a compressor a/r of .45. The turbine is 71.5mm/86mm, and the turbine housing a/r is 1.15. This hotside is perfect for a large ported and high RPM 13BT or 13BREW. The flow for this compressor is slightly more than the T61 and GT35R and flows about 68 lbs/min. Again, this has very little run time after it was remanufactured, is in GREAT shape, and has no excessive shaft play and spins great... no oil anywhere.
so do u suggest it?
Thread
Thread Starter
Forum
Replies
Last Post
