BNA_ELLIS

I have 3rd gen to4r turbo with .84 hotside on a large streetport my mechanic has a gt35/40 with 1.06 hotside with stock ports, who would win in a 1/4 mile race. He thinks he would as a .84 housing is too small to give any decent power in the upper rev range any opinions?


Rgds

Icemastr

iTrader: (2)

He will probably win if your both running the same boost since the first gens have a significant weight advantage.

Infini IV

I think the 1st Gen would win too, because of the weight advantage in combination with what should be a broader powerband with the 35/40

DCrosby

What about two FD's ?? One T04r, and one GT35/40 !?

BNA_ELLIS

We shall find out on Monday when we hit the drag strip providing the weather is good..
My car is still untuned as such it's running a very conservative map until I get to the rolling road on the 19th May. I want to run 1.1 bar should 400rwhp be attainable with a .84 hotside at that boost ?

BNA_ELLIS

Actually I made a mistake it's a .96 a/r housing not .84
I'll only be running 12 psi on a conservative map, I think my mechanic will be running I think 1.4 bar as he has no boost control.

timrxmotors

Did 7 runs,and got 11.8 1/4 mile.On the last run I snapped an axle shaft.The FD broke its diff on the first launch,so I won that one!

mikey D

with 255 at the wheels an fb will run a mid 12 easy.

i have a 2100lbs fb with 255ish at the wheels and posted a 12.57 and a 2 second 60ft time on a s5 turbo

BNA_ELLIS

I'll have you next time I been practising
http://www.ebaumsworld.com/dragrace3.html