Strange KKK Turbo (SR Motorsports) info
10-12-02, 02:57 PM
#26
Senior Member
Join Date: Feb 2001
Location: GA
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Ernie- why are you denying that your turbo, at the very least, uses a Hoslet compressor housing. It's very obvious to everyone else. Are you offended that your turbo uses Hoslet parts? Besides, wasn't it determined in the last thread that Ray mates a Hoslet housing with a KKK compressor wheel?
10-12-02, 04:15 PM
#28
Eats, Sleeps, Dreams Rotary
iTrader: (2)
Let's just say Ray is very good at relabeling stuff to increase his profit:
1. Koyo radiator with a sticker over the Koyo Logo then it becomes his competition radiator and sold for twice the retail price.
2. HKS SS manifold, not relabeled but he won't tell you it's from HKS and sold for more than retail.
3. Power FC with his sticker on it with his commander tuning which makes the car run so rich that you actually lose horsepower. This bull **** tuning is going to cost you $350. You might as well just increase the PIM setting to 20% on all the rpm to get the same effect and save yourself $350 and use that $350 to put your car on the dyno to have some real tuning done and you might have some change left.
It does not surprise me that IF he actually sells the Holset turbo as KKK. Maybe KKK is just his own code for the turbo as he likes to relabel stuff. Maybe it's not KKK, the turbo company but KKK from Ray's special spec. He could have named it XXX, AAA, or whatever but I guess KKK looks and sounds the best.
Chuck Huang
1. Koyo radiator with a sticker over the Koyo Logo then it becomes his competition radiator and sold for twice the retail price.
2. HKS SS manifold, not relabeled but he won't tell you it's from HKS and sold for more than retail.
3. Power FC with his sticker on it with his commander tuning which makes the car run so rich that you actually lose horsepower. This bull **** tuning is going to cost you $350. You might as well just increase the PIM setting to 20% on all the rpm to get the same effect and save yourself $350 and use that $350 to put your car on the dyno to have some real tuning done and you might have some change left.
It does not surprise me that IF he actually sells the Holset turbo as KKK. Maybe KKK is just his own code for the turbo as he likes to relabel stuff. Maybe it's not KKK, the turbo company but KKK from Ray's special spec. He could have named it XXX, AAA, or whatever but I guess KKK looks and sounds the best.
Chuck Huang
Originally posted by InitialD FC
Im not choosing sides here... but just so everyone can see what you guys are talking about...
Im not choosing sides here... but just so everyone can see what you guys are talking about...
10-12-02, 06:55 PM
#30
Originally posted by ErnieT
That guy is total idiot.......You have to sort through some of the bullshit here and that is one of the "bullshit" posts Im talkin about. Sometime people just get on here and post, just to post.
That guy is total idiot.......You have to sort through some of the bullshit here and that is one of the "bullshit" posts Im talkin about. Sometime people just get on here and post, just to post.
. I copied it from another site.I have the KKK Stage 1 for my FC.
I don't really care if its a Holset or not. Its a great turbo.
The reason I posted was just to find out of anyone could confirm the rumour that the SR turbo's aren't really KKK...that's all, end of story
10-12-02, 09:01 PM
#31
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by eViLRotor
I hope that wasn't directed at me, since I did not write the statement in question . I copied it from another site.
I have the KKK Stage 1 for my FC.
I don't really care if its a Holset or not. Its a great turbo.
The reason I posted was just to find out of anyone could confirm the rumour that the SR turbo's aren't really KKK...that's all, end of story
I hope that wasn't directed at me, since I did not write the statement in question
. I copied it from another site.I have the KKK Stage 1 for my FC.
I don't really care if its a Holset or not. Its a great turbo.
The reason I posted was just to find out of anyone could confirm the rumour that the SR turbo's aren't really KKK...that's all, end of story
10-13-02, 01:02 AM
#33
Junior Member
Join Date: Oct 2002
Location: South Australia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
kkk k27 blitz turbo
any one want to buy a kkk k27. i have a fully rebuilt (gcg turbos) one with new ceramic coated manifold to suit series6. it produced well over 300rwkw on my car. attached is an old photo.
10-14-02, 08:38 PM
#35
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Silver7
That is exactly what I said. I thought this was resovled in the last thread about this contraversy.
That is exactly what I said. I thought this was resovled in the last thread about this contraversy.
It has happened once or twice......maybe...
10-14-02, 10:26 PM
#38
Full Member
Join Date: Mar 2001
Location: Blue Springs MO
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ErnieT
That guy is total idiot.......What reason would Ray have to lie about the turbo? People are such dipshits sometimes, it kills me.
You have to sort through some of the bullshit here and that is one of the "bullshit" posts Im talkin about. Sometime people just get on here and post, just to post.
That guy is total idiot.......What reason would Ray have to lie about the turbo? People are such dipshits sometimes, it kills me.
You have to sort through some of the bullshit here and that is one of the "bullshit" posts Im talkin about. Sometime people just get on here and post, just to post.
I see that Rotaryturbo has been banned and his response deleted. WTF? I also see that ErnieT is a moderator.
Rotaryturbo is an upstanding guy. He's helped many people throughout the rotary community including myself. He's debunked many myths about the limit's of performance of various mods in his screaming 11sec FC showcar. He is alway's willing to share his knowlege, as he was doing on this post.
ErnieT, I sure hope you visit the KC site. I'll gladly abuse my Admin status in the same way you have here.
Does anyone else agree on this? Of course, this too may be deleted and me banned as well. I think some phone calls are in order.
Scott May- Membership Director KC RX-7 club.
10-14-02, 10:58 PM
#39
Banned. I got OWNED!!!
Join Date: Sep 2002
Location: Saint Louis
Posts: 2,092
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by JScott
I'm really disapointed in ErnieT here. Rotaryturbo was just trying to help some people out, maybe save them some money and you resort to name calling. Let's see.... "dipshit" "idiot" "bullshit".
I see that Rotaryturbo has been banned and his response deleted. WTF? I also see that ErnieT is a moderator.
Rotaryturbo is an upstanding guy. He's helped many people throughout the rotary community including myself. He's debunked many myths about the limit's of performance of various mods in his screaming 11sec FC showcar. He is alway's willing to share his knowlege, as he was doing on this post.
ErnieT, I sure hope you visit the KC site. I'll gladly abuse my Admin status in the same way you have here.
Does anyone else agree on this? Of course, this too may be deleted and me banned as well. I think some phone calls are in order.
Scott May- Membership Director KC RX-7 club.
I'm really disapointed in ErnieT here. Rotaryturbo was just trying to help some people out, maybe save them some money and you resort to name calling. Let's see.... "dipshit" "idiot" "bullshit".
I see that Rotaryturbo has been banned and his response deleted. WTF? I also see that ErnieT is a moderator.
Rotaryturbo is an upstanding guy. He's helped many people throughout the rotary community including myself. He's debunked many myths about the limit's of performance of various mods in his screaming 11sec FC showcar. He is alway's willing to share his knowlege, as he was doing on this post.
ErnieT, I sure hope you visit the KC site. I'll gladly abuse my Admin status in the same way you have here.
Does anyone else agree on this? Of course, this too may be deleted and me banned as well. I think some phone calls are in order.
Scott May- Membership Director KC RX-7 club.
10-14-02, 11:13 PM
#40
rotary sensei
iTrader: (5)
Join Date: Mar 2001
Location: Virginia
Posts: 2,312
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Resource
100% in agreement.
100% in agreement.
10-14-02, 11:22 PM
#42
Full Member
Join Date: Mar 2001
Location: Blue Springs MO
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mr rx-7 tt
You didn't ban him did you Ernie..? Who ever did let him back in....I say unless he threatens someone or is a menace to everyone don't ban..
You didn't ban him did you Ernie..? Who ever did let him back in....I say unless he threatens someone or is a menace to everyone don't ban..
I think we have a forum moderator ****.
10-14-02, 11:33 PM
#43
Wankel Traitor
Join Date: May 2002
Location: Lawrence, KS
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by JScott
I'm really disapointed in ErnieT here. Rotaryturbo was just trying to help some people out, maybe save them some money and you resort to name calling. Let's see.... "dipshit" "idiot" "bullshit".
I see that Rotaryturbo has been banned and his response deleted. WTF? I also see that ErnieT is a moderator.
Rotaryturbo is an upstanding guy. He's helped many people throughout the rotary community including myself. He's debunked many myths about the limit's of performance of various mods in his screaming 11sec FC showcar. He is alway's willing to share his knowlege, as he was doing on this post.
ErnieT, I sure hope you visit the KC site. I'll gladly abuse my Admin status in the same way you have here.
Does anyone else agree on this? Of course, this too may be deleted and me banned as well. I think some phone calls are in order.
Scott May- Membership Director KC RX-7 club.
I'm really disapointed in ErnieT here. Rotaryturbo was just trying to help some people out, maybe save them some money and you resort to name calling. Let's see.... "dipshit" "idiot" "bullshit".
I see that Rotaryturbo has been banned and his response deleted. WTF? I also see that ErnieT is a moderator.
Rotaryturbo is an upstanding guy. He's helped many people throughout the rotary community including myself. He's debunked many myths about the limit's of performance of various mods in his screaming 11sec FC showcar. He is alway's willing to share his knowlege, as he was doing on this post.
ErnieT, I sure hope you visit the KC site. I'll gladly abuse my Admin status in the same way you have here.
Does anyone else agree on this? Of course, this too may be deleted and me banned as well. I think some phone calls are in order.
Scott May- Membership Director KC RX-7 club.
I completely agree with Scott on this. Ben is an outstanding guy, and is very well known. He's always willing to share his knowledge; he's one of the guys in our community who has tried more than just a few setups on his car.
Banning him probably wasn't a good idea, let alone deleting his posts.
I absolutely hate to jump into stuff like this, but I know how he must feel right now. I used to be a moderator of an "enemy" forum, and for this reason I had many privilidges revoked from my account. I have been a member of this forum for 4 years now, and I had to create a new account just so I could POST!
Anyway, if his account could be restored, I think we all would greatly appreciate it.
Best Regards,
Jameson Huckaba
10-14-02, 11:37 PM
#44
Banned. I got OWNED!!!
Join Date: Sep 2002
Location: Saint Louis
Posts: 2,092
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mr rx-7 tt
Don't be down on Ernie..He throws out a lot of good and CORRECT info from time to time. I am sure he didn't mean what he said just tosing out a little profanity..keeps the forum lively...
Don't be down on Ernie..He throws out a lot of good and CORRECT info from time to time. I am sure he didn't mean what he said just tosing out a little profanity..keeps the forum lively...
So Ernest,if you stop acting like an *** we will stop rippin on you!!
10-15-02, 12:03 AM
#45
Newbie
Join Date: Oct 2002
Location: Kansas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hey Ernie, how old are you anyway? I don't remember someone getting so upset and throwing a temper tantrum since elementary school. It's too bad you can only dish it out and not take it, because people like rotary turbo have been helping a lot of other people on this forum as well as others with advice. This guy has been working on RX7's for a long time. His personal car is one of the best 2nd gen examples in the country.
BTW he has never had a shop do any work for him...........Can you say the same?
BTW he has never had a shop do any work for him...........Can you say the same?
10-15-02, 01:55 AM
#47
Junior Member
Join Date: Apr 2002
Location: kansas city, mo
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
totally agree, bring rotary turbo back AND apollogize.
I joined this forum to get good advise and such, but people like ernie that pile on the crap make this place unpleasent. Don't we all have a common interest??? I think the B.S should be left at the door.
I joined this forum to get good advise and such, but people like ernie that pile on the crap make this place unpleasent. Don't we all have a common interest??? I think the B.S should be left at the door.
10-15-02, 07:20 AM
#48
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
You guys need to take a chill pill. I stated what I thought was true and was wrong and admitted to it. As for name calling, I didn't call anyone names, I simply stated what I though people acted like, posting just to make a post. And for the record I admitted to making a mistake. More than most people do on here. Yes, I did delete his post, because he was making threats in it.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
3
08-20-15 10:24 PM
