i am installing the apexi rx6 single turbo and was wondering if any one recomends some sort of ignition system and what do you think of the kenne bell spark boost

 

Kenne Bell who? You can build your own ignition system! It all depends on budget...

 

The twin power is working for me and quite a few others.

 

this is about the last thing i need so have little mpney

 

i have the rx6 turbo set up also, i am running a jacobs fc1000, its a nice ignition amp look in to it.

 

XS Engineering makes an amplifier as well.

 

The kenne bell IGN is *decent* as in, I know a couple guys running it (boinger engines) and heard of no trouble. But I have no idea what their system actually consists of as far as whether its an actual amplifier or not however.

 

you don't need any ignition mods w an RX6. just make sure you have good spark plug wires and run 9s or 9 and 10 plugs.

the RX6 is a wonderful turbo but doesn't move enough air to challenge the FD elec system.

i just saved you some money

howard coleman

 

When do you think the stock system gets challanged? What boost or power levels and also what conditions?

 

my guess is you can run 410 rwhp w the OEM ignition as long as the plug wires and sparkplugs are fresh.

if you are running water injection probably not...

hc