(serached) Need Help On 3 choices
08-25-06, 06:09 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Katy Tx
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
(serached) Need Help On 3 choices
debating on a
60-2 single from rx7store.net
xs engineering t04E
or GT35 R
these are pretty much as far as i've found the only kits within my budget.
i'm looking for best bang for probably no more then 3-325 Hp, or whatever 10psi gives me. but i would like the quickest spooling for the money. yes i know about the stock twins but i'm gettign rid of them
i searched around but i coudln't find a decent comparison. it'll be pump gas.
just put together a COMPLETE FaC STOCK port 3rd gen motor, everythign in there is new except irons, rotors and e-shaft. rotors been polished up. and getting a exccessive (sp?) LIM, Power FC on it's way, 1300cc sec. and 255lph fuel pump. and tune. what would ya'll reccomend? thanks
lOS
60-2 single from rx7store.net
xs engineering t04E
or GT35 R
these are pretty much as far as i've found the only kits within my budget.
i'm looking for best bang for probably no more then 3-325 Hp, or whatever 10psi gives me. but i would like the quickest spooling for the money. yes i know about the stock twins but i'm gettign rid of them
i searched around but i coudln't find a decent comparison. it'll be pump gas. just put together a COMPLETE FaC STOCK port 3rd gen motor, everythign in there is new except irons, rotors and e-shaft. rotors been polished up. and getting a exccessive (sp?) LIM, Power FC on it's way, 1300cc sec. and 255lph fuel pump. and tune. what would ya'll reccomend? thanks
lOS
08-28-06, 01:22 PM
#4
Junior Member
Join Date: Jul 2005
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
check out the apexi RX-6, i hear they have really fast resonse similar to the stock twins. I personally have a gt35R and love it. Full boost around 3500 rpm with a 1.02 A/R. I imagine if you select a smaller compressor (on either of your selections) your boost response would be quicker.
08-28-06, 06:47 PM
#5
Rotary Enthusiast
Join Date: Feb 2001
Location: In the Sky
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
try going with the GT35R T4 1.06 www.a-spec.com
08-29-06, 10:02 AM
#7
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Katy Tx
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
i'm trying not to pass 2800-3000. but if i need to i can go a bit more. i like the apexi kit. but i want an upgradable/rebuildable turbo. for the "worst case scenarion" deal. i've thought of the hks gt35r. didn't know i could change the turbines on those. i've been reading not many liek 62-1 on rotaries due to efficiency problems.. dunno how tru. i wont' exceed 320rwhp or 10psi. but would like spool/response over power. what other options are there for the 35r?
tia
Los
tia
Los
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
