I am having problems finding sources for the oil feed fitting for the block on by REW. I want to run a -3an line and don't want a bunch of adapters inline. I guess it wouldn't matter if its a banjo adapter or straight thread adapter. If you have bought one let me know who you bought it though.

Thanks

 

got mine at summitracing.com

 

Could you help me out as I had looked there before. I found m14 to -4 but not -3. Also could not find an m14 banjo.

 

If you search you'll find I listed a dealer and the part number for one.

 

I looked and they don't list it on their site either. Just the -4an. I am assuming they just don't list them then and you have to call in?

 

damn, i looked all over for a receipt on where i got my fittings, come to think of it, the other place had a cheaper price.. call earl's or summit and tell them what you want, they should be able to help you out.

 

You can also chop off the stock banjo and tap it to fit a -3 to -3 adapter.

http://dave.newbern.org/gallery/album01/ady

 

or you could just call summit and tell them what you need. If they have it they will tell you. If they don't they will do the same. I've found that trying to find stuff doesn't always work out just because they have so much stuff.

 

Very nice!

 

I chopped my banjo and tapped it for 1/8"NTP to -3 and used a Earls fitting
Work great and looks great

 

maybe you could use something from here http://64.202.180.37/files/metric.pd...0hose%20end%22

I just ordered a banjo from them and they seem pretty good. They have alot of the hard to find -AN to metric fittings.

 

I ended up ordering from batinc that Ccarlisi. The part numbers and prices have changed though from what he has posted. Damn Banjo M14--3an is $22.

 

Yikes! It's a very nice piece though. I'm sure you'll be happy with it. Just bear in mind that it is aluminum and very small, so be careful not to over tighten it. I didn't have a problem with mine, but someone else that ordered one broke it.