Large Turbo needed!!!
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Large Turbo needed!!!
Anyone have or know where I can find a turbo to support 97 lb/min @ 4.0 pressure ratio or a slightly smaller one to flow 94 lb/min @ 3.8 press. ratio.
crispeed
87TII
9.20@150mph
crispeed
87TII
9.20@150mph
Senior Member
Joined: Jul 2001
Posts: 322
Likes: 0
From: Birmingham, AL
Email me your # so I can call you about the turbo.
EXCESboost@aol.com
EXCESboost@aol.com
GTR eater
Joined: Feb 2001
Posts: 664
Likes: 0
From: Tucson Arizona
Re: Large Turbo needed!!!
Originally posted by crispeed
Anyone have or know where I can find a turbo to support 97 lb/min @ 4.0 pressure ratio or a slightly smaller one to flow 94 lb/min @ 3.8 press. ratio.
crispeed
87TII
9.20@150mph
Anyone have or know where I can find a turbo to support 97 lb/min @ 4.0 pressure ratio or a slightly smaller one to flow 94 lb/min @ 3.8 press. ratio.
crispeed
87TII
9.20@150mph
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Re: Re: Large Turbo needed!!!
Originally posted by soul assassin
was that english?
was that english?
BTW. Any info on those intake manifold gaskets?
crispeed
87TII
9.20@150mph
Senior Member
Joined: May 2001
Posts: 395
Likes: 0
From: Baltimore, Maryland USA
Did you try innovative turbo? I talked to them at the PRI show and got a catalog with a bunch of compressor maps from memory don't hold me too it but I'm pretty sure there GT80 is capable of this.
Trending Topics
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by rotor_dee
Did you try innovative turbo? I talked to them at the PRI show and got a catalog with a bunch of compressor maps from memory don't hold me too it but I'm pretty sure there GT80 is capable of this.
Did you try innovative turbo? I talked to them at the PRI show and got a catalog with a bunch of compressor maps from memory don't hold me too it but I'm pretty sure there GT80 is capable of this.
My friend bought one for his race car. Waiting to see what it looks like first!
crispeed
87TII
9.20@150mph
Ok Chris, i have one of those turbos built, and its will be shipped out for me... Should be here late next week or so. I will measure the wheels when it gets in and let you know what size they are. Its a custom turbo and i forgot to ask for the specs before it got mailed out... but it will definately flow those kind of numbers that you are looking for!
I'll let you know when it comes in...
I'll let you know when it comes in...
Senior Member
Joined: May 2001
Posts: 395
Likes: 0
From: Baltimore, Maryland USA
Yeah I got to get a first hand look at one of these with dual ball bearing set up and my first thought was why didn't someone do this a while ago!!
And my next question is who wants to buy my t-72
On a side note any one no where to get a tubine wheel for a Greddy
T-88 (Unrepairable frustrating piece of crap)
rotor_dee
I got to get a first hand look at one of these with dual ball bearing set up and my first thought was why didn't someone do this a while ago!! And my next question is who wants to buy my t-72
On a side note any one no where to get a tubine wheel for a Greddy
T-88 (Unrepairable frustrating piece of crap)
rotor_dee
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by rotor_dee
Yeah I got to get a first hand look at one of these with dual ball bearing set up and my first thought was why didn't someone do this a while ago!!
And my next question is who wants to buy my t-72
On a side note any one no where to get a tubine wheel for a Greddy
T-88 (Unrepairable frustrating piece of crap)
rotor_dee
Yeah
I got to get a first hand look at one of these with dual ball bearing set up and my first thought was why didn't someone do this a while ago!! And my next question is who wants to buy my t-72
On a side note any one no where to get a tubine wheel for a Greddy
T-88 (Unrepairable frustrating piece of crap)
rotor_dee
www.micturbo.com
crispeed
87TII
9.20@150mph
Last edited by crispeed; Jan 3, 2002 at 12:44 PM.
Rotary Enthusiast
Joined: Feb 2001
Posts: 1,375
Likes: 0
From: The First State
Originally posted by InitialD FC
Hey Chris!
Turbo will be here Wednesday, possibly Thursday... I will take pics and measure it all out for you when it gets here, hope you like it!
Hey Chris!
Turbo will be here Wednesday, possibly Thursday... I will take pics and measure it all out for you when it gets here, hope you like it!
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM