|
Large Turbo needed!!!
Anyone have or know where I can find a turbo to support 97 lb/min @ 4.0 pressure ratio or a slightly smaller one to flow 94 lb/min @ 3.8 press. ratio.
crispeed 87TII 9.20@150mph |
I'll help you out if you help me out! :beerchug:
B |
Originally posted by FEARED7 I'll help you out if you help me out! :beerchug: B No problem!:) crispeed 87TII 9.20@150mph |
Email me your # so I can call you about the turbo.
EXCESboost@aol.com |
Re: Large Turbo needed!!!
Originally posted by crispeed Anyone have or know where I can find a turbo to support 97 lb/min @ 4.0 pressure ratio or a slightly smaller one to flow 94 lb/min @ 3.8 press. ratio. crispeed 87TII 9.20@150mph |
Re: Re: Large Turbo needed!!!
Originally posted by soul assassin was that english?:D BTW. Any info on those intake manifold gaskets?:) crispeed 87TII 9.20@150mph |
Did you try innovative turbo? I talked to them at the PRI show and got a catalog with a bunch of compressor maps from memory don't hold me too it but I'm pretty sure there GT80 is capable of this.
|
Originally posted by rotor_dee Did you try innovative turbo? I talked to them at the PRI show and got a catalog with a bunch of compressor maps from memory don't hold me too it but I'm pretty sure there GT80 is capable of this. My friend bought one for his race car. Waiting to see what it looks like first! crispeed 87TII 9.20@150mph |
Ok Chris, i have one of those turbos built, and its will be shipped out for me... Should be here late next week or so. I will measure the wheels when it gets in and let you know what size they are. Its a custom turbo and i forgot to ask for the specs before it got mailed out... but it will definately flow those kind of numbers that you are looking for! :D
I'll let you know when it comes in... |
Yeah :) I got to get a first hand look at one of these with dual ball bearing set up and my first thought was why didn't someone do this a while ago!!
And my next question is who wants to buy my t-72 :) On a side note any one no where to get a tubine wheel for a Greddy T-88 (Unrepairable frustrating piece of crap) rotor_dee |
Originally posted by rotor_dee Yeah :) I got to get a first hand look at one of these with dual ball bearing set up and my first thought was why didn't someone do this a while ago!! And my next question is who wants to buy my t-72 :) On a side note any one no where to get a tubine wheel for a Greddy T-88 (Unrepairable frustrating piece of crap) rotor_dee www.micturbo.com crispeed 87TII 9.20@150mph |
Hey Chris!
Turbo will be here Wednesday, possibly Thursday... I will take pics and measure it all out for you when it gets here, hope you like it! |
Originally posted by InitialD FC Hey Chris! Turbo will be here Wednesday, possibly Thursday... I will take pics and measure it all out for you when it gets here, hope you like it! |
Originally posted by Greg I will like it even more ;) |
My friend's one is suppose to come in today also!
crispeed 87TII 9.20@150mph |
| All times are GMT -5. The time now is 01:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands