ziig

iTrader: (1)

thats weird..my HX55 made 15 psi at 3800 to 4000 rpm and I put down 320 hp dont recaalll Torque numbers..that was just bigger secondaries and a RTEK

killahrx7

second that, this turbo shouldn't be laggy, i know alot of people using the 55 and it's more responsive than a gt42. my cousin has 55 on his car also 1st to 3rd gear spinning 275 40 17 all day long. check it out something is not too right. nice power though

staticguitar313

iTrader: (2)

Its a laggy turbo, I was afraid of this confirmation, I'm kinda glad i didn't pick up the one someone is selling locally, 5500 is way too late for me.

cpnneeda

iTrader: (1)

Buddy of mine runs a HX50. Laggy for me, but he still hits full boost before 5k. I've seen the 50 make 680 on a FD, so the HX52 shouldn't have a problem. I think you may need to look into the exhaust housing. Everything I read and understand about the exhaust size, is that we should use somewhere between a 19-22cm^2 housing. Maybe a 18 being the smallest. You may be losing power by forcing too much exhaust into that small housing. My research was for 3rd gens, but I know my brothers T2 has always liked bigger A/R's. You might want to source a bigger hot side, throw it on, and give it a shot. Good Luck.


Oh and no restriction pills, these things like oil in them. Stock line size or the SS line that comes with most kits, and have a happy day. These turbos are also meant to be "field" serviceable as well according to Holset. Obviously the side of the highway may be out of the question, but we have rebuilt one HX-50 and a H1E, and it was quite easy. Great turbo's IMHO, hate noone uses them as much as they do.

killahrx7

hx52 has a 16cm^2 which is the smallest any 50 series come in and that is responsive. look into exhaust manifold.

ziig

iTrader: (1)

HEY i remeber one thing with mine ..i had too much restriction in my muffler...boost was very slow to respond............I got a free flow exauhst and BOOOM
3400 rpm FULL BOOST...
see if your muffler is the culprit....

nu-rx7junkie

iTrader: (1)

I see 10psi at4000 rpm right now on my half bridge.(untuned) I thought the hx52 was closer to a gt42. Step up to a half or full bridge? Or run some nitrous?

hkp

iTrader: (2)

i am running the hks cast manifold, un-divided, to a greddy 80mm d.p to a greddy 80mm exhaust that is very open and very loud. my wastegate is dumped to atmosphere. im not sure why my boost doesnt come in early but that was the reason i bought the turbo, lots of talk about response and power. i have power, no response. i would like to turn up the boost but s.p. s4 motor would crack an iron in a heartbeat. i am thinking about getting a good divided manifold and seeing what good that does.

hkp

iTrader: (2)

well, the car has been down due to running like ****, checked the compression today and rear rotor no bueno : ( looks like its time for that motor rebuild ive been dreaming about, maybe re this time.

Nutty RX3

In which car do you have this setup in. whickh exhaust manifold did you end up using.

robx7fcna

Nice, I like seeing more of these holset threads poping up. I have a Holset HX50 that I will be using on my S5 streetport (no dowels as well but have s6 rotors). It is a 60mm inducer, 90mm exducer on the compressor, and a 85mm inducer and 71mm exducer on the turbine. Im looking for around 450 in the high teen psi.

It would be cool to have a holset thread where we can take these turbos, measure the wheels and such.

thanks for posting this!

pistola

hi, have you got any clips of your car running?
cheers

Joselo

iTrader: (1)

Glad to see this post I will be installing my hx55 on my FD engine and putting in my 65 beetle that only weighs 1100 pounds. I can already smell the tires burning!!!

BoostedBseries

Im running a t2 with a stockport s4 motor hks undivided manifold and a hx52, i blewup my t04s last day at the dragstrip lastyear so i havent got to drive it much yet but it seems to spool well. As soon as its back out ill let yous know how it works

hkp

iTrader: (2)

this holset is terrorizing me, put it on another s4 motor, cracked front plate, doweled a motor, put it in, ate the front bearing, now its getting restacked, hopefully some porting, and put back in, will report back in a couple of weeks.

jaggermouth

iTrader: (1)

Hopefully REW plates will hold up to the challenge

BoostedBseries

Got the 7 backout yesterday and the 52 is awsome! Cruising in 4th at 2500 instant 5psi and 25 psi by about 3800 ... Had a lil boost controller issue should only be hitting 15psi. Did a couple quick pulls 2 to 6500 or so in third and it pulls nicely on 8 psi. Little tuning and if its nice out tmrw im gona track it and ill let everyone know what happens.

hkp

iTrader: (2)

damn you, im putting mine together right now, what size turbine housing are you running? how was that 25psi feeling?

BoostedBseries

Im using a 16cm currently and i set boost at 18 lbs and 10.2 afrs til redline and it pulls soo hard. I wasnt premixing and my omp failed on tuesday, i lost the rear rotor so ill be rebuilding in the next week or so, i cant wait to take it to the track.

sharingan 19

iTrader: (16)

Sounds like these turbos are cursed, lol

Gothpanda

Absolutely wonderful news. I've always been a fan of the holsets, is this one with the twinscroll?

BoostedBseries

Yes its a twinscroll, i just knifeedged the divider before i put it on.

BoostedBseries

Got the car back together last night with a nice s5 shortblock. 2k in 5th gear makes boost instantly with throttle input, the slightly higher compression is quite noticable.

chinzilla83

iTrader: (1)

I just picked up an hx52 with a 16cm hot side im hopeing it works for me, how did it work for you after rebuild

BoostedBseries

Long story short, the s5 motor had 3piece seals and was a bastardized pos, cracked a seal. Tore it down streetported it and threw in some ALS apex seals. I was running 20psi on pump with 5degrees advance till 8000 and it works well. Should have it back out in a couple weeks then ill finally track it. Mayb even dyno it