Single Turbo RX-7's Questions about all aspects of single turbo setups.

Help, rpm and TD06 problem.

Thread Tools
 
Search this Thread
 
Old Jun 17, 2003 | 10:46 PM
  #1  
AT47's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 15
Likes: 0
From: toronto
help

i need help guys..i just got my fd set up with the td06, im pretty happy at the begining with all the power and all, but after awhile when im not stepping on gas, the rpm will go about 1000 and then drops down to 0 , and it just keeps on doing that forever..i can hear the exhaust sound bouncing up and down very clear...i set the boost at 12psi, i dont no much about cars...so please help me on this...thanx~~~~~~~~~~
o yea...one more thing...after the idle happened, the turbo doesnt kick in when it suppost to be...why?!?!?!?!?!?!?
Reply
Old Jun 18, 2003 | 12:01 AM
  #2  
kyle@insight's Avatar
Dont like it? I dont care
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 931
Likes: 0
From: Gold's Gym
Did you have the car professionally tuned or at least get some sort of basemap (assuming you have a stand alone ECU) before taking the car out and geting on it at all?
Reply
Old Jun 18, 2003 | 03:31 PM
  #3  
AT47's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 15
Likes: 0
From: toronto
yea i did...i took it to a japanese tuning shop, the guy is pretty good i had the ecu upgraded and the greddy stage 2 intercooler 850cc primery injector and 1300cc secondary, greddy downpipe midpipe and catback, the car runs about 12ps(0.8bar) and 330hp at the wheel, im happy about it...my friends told me it could be the vaccum hose got lose or soemthing..anyway..thanx for the reply~~~~
Reply
Old Jun 20, 2003 | 09:32 PM
  #4  
RE13REW's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jan 2003
Posts: 451
Likes: 0
From: San Francisco
Did you do all the upgrade in the same time ? or one by one..... anyway, if you do those all together i guess is your ECU problem, i mean the setting is not right for it. The others upgrade should be fine, and the only one i m worry about is your ECU. Try to put back your original ECU in it, and see what happen..... I think the boost problem is from the ECU too... may be the pressure senser..... just try to put back the old ECU....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
Oct 29, 2015 06:47 AM
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
Einheri
Single Turbo RX-7's
14
Oct 7, 2015 12:23 PM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM




All times are GMT -5. The time now is 02:26 PM.