GT42R set up
Thread Starter
Joined: May 2004
Posts: 722
Likes: 1
From: Yonkers N.Y.
GT42R set up
I want to run a GT42R in my FD for a signle turbo set up. I want to know what manifold, wastegate, etc. I should run. I'm shooting for 600hp.
thanks guys
thanks guys
600hp is going to need about 30psi with a race ported engine. Big fuel pump or 2, with at least 850 primary 1600 secondary. I would do a large wastegate(50mm) and 2 blowoff valve as well(greddy type R's). You want 600rwp or 600 flywheel? If you did alky/water injection and ran 24psi you should hitlow to mid 500rwp range
http://www.rx7store.net/product_p/hk...0wastegate.htm wastegate
http://www.rx7store.net/product_p/gr...%20r%20bov.htm BOV's
http://www.rx7store.net/product_p/hk...-95%20rx-7.htm manifold
http://www.rx7store.net/product_p/hk...0wastegate.htm wastegate
http://www.rx7store.net/product_p/gr...%20r%20bov.htm BOV's
http://www.rx7store.net/product_p/hk...-95%20rx-7.htm manifold
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
You'll make 520rwhp @ 20 psi
670ish at 32psi
711 at 35-36psi

Street Port is all thats needed. You will need a healthy fuel system. ASpec has the kit I bought. Magnus Motorsports also sells the kit with dual wastegates which is nicer if your going to run lower boost like 15psi. For my purposes the Aspec kit does a great job. Oh, get the T6 manifold, not the T4.
670ish at 32psi
711 at 35-36psi

Street Port is all thats needed. You will need a healthy fuel system. ASpec has the kit I bought. Magnus Motorsports also sells the kit with dual wastegates which is nicer if your going to run lower boost like 15psi. For my purposes the Aspec kit does a great job. Oh, get the T6 manifold, not the T4.
Trending Topics
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
You'll make 520rwhp @ 20 psi
670ish at 32psi
711 at 35-36psi

Street Port is all thats needed. You will need a healthy fuel system. ASpec has the kit I bought. Magnus Motorsports also sells the kit with dual wastegates which is nicer if your going to run lower boost like 15psi. For my purposes the Aspec kit does a great job. Oh, get the T6 manifold, not the T4.
670ish at 32psi
711 at 35-36psi

Street Port is all thats needed. You will need a healthy fuel system. ASpec has the kit I bought. Magnus Motorsports also sells the kit with dual wastegates which is nicer if your going to run lower boost like 15psi. For my purposes the Aspec kit does a great job. Oh, get the T6 manifold, not the T4.
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
rx8volks
Canadian Forum
0
Aug 13, 2015 04:55 AM






