GT35R Turbo Question
#2
Microtech Tuning!
Join Date: Feb 2002
Location: 626 Socal
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
I haven't seen any dyno sheets of any GT35R's making over 400rwhp... Maybe I'm not looking hard enough...?
The GT40R *should* get you near 450rwhp @15psi though...
The GT40R *should* get you near 450rwhp @15psi though...
#7
Rebreaking things
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
Zoomzoom made 404 at ~15lbs on a reman at KD. However, they apparently wired up his crank angle sensors backwards so I believe he was running very aggressive timing (which would also explain why he lost a few motors on the dyno there). Since he put a street port motor in and fixed the crank angle sensor problem I believe the highest he has seen is 378rwhp at 15.5, but the motor was losing compression with each pull so that's not an ideal reference either.
Trending Topics
#8
Microtech Tuning!
Join Date: Feb 2002
Location: 626 Socal
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Yes, GT35R = GT35/40
hey matt83usc, why do you say I'm not looking hard enough? Have you found a dyno of a GT35R making over 400rwhp ? If so, please post it... I'm interested
hey matt83usc, why do you say I'm not looking hard enough? Have you found a dyno of a GT35R making over 400rwhp ? If so, please post it... I'm interested
#9
Rotary Enthusiast
Join Date: Feb 2001
Location: In the Sky
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
do a search for GT 35/40 and you will find some dynos over 400rwhp at 15 psi.. of course good tuning is required!
Originally posted by Infini IV
Yes, GT35R = GT35/40
hey matt83usc, why do you say I'm not looking hard enough? Have you found a dyno of a GT35R making over 400rwhp ? If so, please post it... I'm interested
Yes, GT35R = GT35/40
hey matt83usc, why do you say I'm not looking hard enough? Have you found a dyno of a GT35R making over 400rwhp ? If so, please post it... I'm interested
#10
Senior Member
Join Date: Dec 2002
Location: cali
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
If there out there let's see them, I believe there is one, and it's on the dyno comparo site. Not exactly common.
Sorry it's been a year since I gave you all **** on this. Carl
Sorry it's been a year since I gave you all **** on this. Carl
Thread
Thread Starter
Forum
Replies
Last Post