GT35R Turbo Question
Hi people
Is 450rwhp at 15psi achievable with GT35R on street ported engine? If not what about GT40R? Thanx |
I haven't seen any dyno sheets of any GT35R's making over 400rwhp... Maybe I'm not looking hard enough...?
The GT40R *should* get you near 450rwhp @15psi though... |
is a Gt35/40 same as GT35R?
Also out of the 2 which one is mostly used? |
you arent looking hard enough Infini
|
ok so it is possible to make 450rwhp at 15-17psi with GT35R?
|
ok so it is possible to make 450rwhp at 15-17psi with GT35R?
|
Zoomzoom made 404 at ~15lbs on a reman at KD. However, they apparently wired up his crank angle sensors backwards so I believe he was running very aggressive timing (which would also explain why he lost a few motors on the dyno there). Since he put a street port motor in and fixed the crank angle sensor problem I believe the highest he has seen is 378rwhp at 15.5, but the motor was losing compression with each pull so that's not an ideal reference either.
|
Yes, GT35R = GT35/40
hey matt83usc, why do you say I'm not looking hard enough? Have you found a dyno of a GT35R making over 400rwhp ? If so, please post it... I'm interested :) |
do a search for GT 35/40 and you will find some dynos over 400rwhp at 15 psi.. of course good tuning is required!
Originally posted by Infini IV Yes, GT35R = GT35/40 hey matt83usc, why do you say I'm not looking hard enough? Have you found a dyno of a GT35R making over 400rwhp ? If so, please post it... I'm interested :) |
If there out there let's see them, I believe there is one, and it's on the dyno comparo site. Not exactly common. :rolleyes: :rolleyes: :rolleyes:
Sorry it's been a year since I gave you all shit on this. Carl |
All times are GMT -5. The time now is 07:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands