hey groundzero your owner owns cornilus auto sales right? i bought my 93 rx there eh it has alota isues, i was told you guys did the work on it, and i cant figure out how to adjust the suspension on the front, the tires are tearin the crap outa my pasenger side fender, any suggestions? im so agraviated with this thing if i had the money id tear it down and rebuild it from scratch, so yea any help would be great

 

Take it to a decent shop who sets track cars up, get them to raise the height (any shop could do this, or even you could with some C-spanners and a tape measure!), then get an alignment done.

 

would raising it up just half an inch requir me to do the alignment again? low on cash at the moment so money is an issue

 

Yes, it would require an alignment even after a half inch raise in height. For a short period, it'd be fine to drive though. An alignment doesn't cost much. I'd change the height so it stops ruining the guard (fender) and get it done as soon as you can afford to.

 

yea i plan to, got a job hopefully lined up soon, so then ill have the cash to raise it up get the alignment done, and get some new fenders ro replace the ones that have been torn to ****, could do with just a passenger fender but wanna go with somthin different, maybe a slight flaird set that will make it look a little more agressive and less like a miata

 

oh and do you know anyone that makes custom door panels for these? just somthing thats clearanced towards were the door panel meets the seat, so i could fit wider sport seats in it, if i cant find any, im gona make my own same style just mold in that one section to clearance it so if you know anyone with the same problem wanting some, ill start a new thread with pics once i get them started

 

All you guys are amazing, is a real 1000hp flywheel coming up , 13B style, on gas, alcohol, or NITROMETHANE.

 

There are already a couple of 1000rwhp 13b's out there. I've seen one that did 940 rwhp.

 

Here you go...

http://ausrotary.dntinternet.com/for....php?p=1029880

 

what kind of milage are you getting to the gallon..haha jk nice numbers...go scare some 100k plus cars

 

CONGRATS! keep the good work! ... hopefully I'll get there pretty soon!

for the guys at 600+ ...

what compression rotors are you running? 13b REW or a Cosmo engine? what apex seals setup are you using?

thx!

 

That red secound gen looks like Carlos g's old chassis. And he lives in Ocala Fla. next to Orlando.

 

Stock engine with street porting.

 

Mazda/Atkins/RA? ... 2/3mm?

 

I've got a bone stock Mazda Reman with some porting done. All Mazda seals.

 

Any videos of this monster yet?

 

Can i get a little more info on the 4 injector Secondary setup. . Also what the specs are on the motor itself ... (porting, who built it etc.. )

 

Extended race port (judge ito moster street port)?

 

I know that Ralph has Rob Golden of Pineapple Racing build his engines. I don't know what the current port on Ralphs motor...but I do know that its a street port. No bridging, peripheral ports. CJ