I will probably run 14 to 16 psi. So the street disk with the extreme pressure plate would work? It wouldn't be too soft? Maybe I can get the pp exchanged.

 

Well Im only running 15psi and the ACT street\strip clutch I have in there now is toast. I wouldnt recommend that unless your making less then 400rwhp..

Anyone know how a ACT xt 6 puck feels on the street.. ?

 

the ACT extreme pp and unsprung 6 puck is streetable but requires some finesse. especially with an alum flywheel. its kindof irritating in traffic and just hilarious watching someone else try to drive it. i get chatter on most low speed starts (causes stange looks from pedestrians). i have had it for 2 years or so and am going to try a street disk w/ the extreme pp. this should be more streetable and still handle the power.

by the way this setup takes tons of abuse. i have never in two years felt slip or fad after many repeated hard starts etc...

justin

 

Is this with the XT pressure plate?

I was told by SR Motorsports that the XT pressure plate with the street disc should hold without problems.

I want the car to be streetable, and there's lots of traffic here in socal, so I'm not sure on the 4 or 6 puck disc.

 

not sure if its the xt pressure plate since it was bought about 4 or 5 years ago. All I know is that as soon as my car hits 15psi the clutch doesnt hold.. this happens in 3rd gear when there is more load on the car not 1st or 2nd cause the tires just spin. but who knows prob slipping there too..

 

Hi guys, just following up. I sent a Pay pal payment to youfor two 1600cc Bosch Blue tops, here is the cpy/paste email from paypal;

Dear Carl Byck,

This email confirms that you sent $130.00 USD to nitrofed7@optonline.net.


------------------------------
Payment Details
------------------------------

Amount: $130.00 USD
Transaction ID: 6J197187R6404140E
Subject: 2 bosch injecters 1600
Note:
thanks