anyone have first hand experience with this pump?looks like a great alternative to the 2x044 setup that most of us run who are not runing a BAP.

DeatschWerks is excited to officially release the newest member of their world renowned fuel pump line, the DW350iL. This High Flow, 350 liter per hour fuel pump is DeatschWerks’ first externally mounted in-line fuel pump, expanding its line to continue as one of the most comprehensive in the industry. The DW350iL will be the highest flowing pump DeatschWerks has offered to date. Flowing 350 LPH @ 40psi and over 300 LPH at 70psi, it can support over 750hp. Utilizing roller-vane technology allows a flatter flow curve, which means more flow at higher pressures - a must for turbo and supercharged applications. Along with higher flow rates, the DW350iL comes with -8 AN ORB female fittings on the inlet and outlet to easily incorporate larger fuel lines, an anodized aluminum body, two t-bolt mounting brackets with rubber isolators, and rubber boots to protect the power terminals. The DW350iL has been engineered to fit Bosch 044 surge tanks, which provide reserve fueling capacity and dual pump capability - important in many high power motorsport applications. The DW Advantage •Flows 350 litres per hour (92 gallons per hour) •-8 AN ORB IN/OUT •Supports 750hp (1250hp Dual Setup) •Roller-Vane Technology •3-year no-fault warranty •Race Proven Success in GTA and Formula Drift DW350iL pump kit includes: •2 x Universal Clamps •2 x Connector Boots •2 x Washers •2 x Nuts

 

DW350iL Fuel Pump Tech | Fuel Pump Tech | Resources | DeatschWerks

 

I would maybe wait for PRI, pretty sure Injector Dynamics will be unveiling a gamechanger...

 

There are a few new pumps coming out that are intriguing. I was looking at that DW pump yesterday and the only thing I didn't like about it was that it isn't rated for ethanol. So it's an 044 clone for near 044 money buy doesn't do ethanol.

Will need to stop by the ID booth and see what they have up their sleeve.

 

New there had to be a catch, went through specs couple times and couldn't see a list of fuels it was tolerable with. Damn. Was liking the fact that it had AN threads rather then metric and could have been a nice single pump setup rather then dual 044s.

 

https://m.facebook.com/InjectorDynam...pe=1&source=48

600 lph @ 100 psi in tank! :o

 

Damn that's grunty. I currently try Running 2x 044s but looking for another external for another guys project was trying to not have to do the 044s again but I know it's reliable and works.