1000cc Injector users. What brand did you purchase???
Oh definitely not. He built and tuned my friend's RSX to 493 whp on stock internals. I have to admit I got jealous for stock internals. He even got an S2000 to 700+ on stock internals. Makes me feel that my car is lacking something at times. Then I watch both of them blow their transmissions and I'm somewhat satisfied with my car. 
Still going to Steve to build and tune though.
Still going to Steve to build and tune though.
Lives on the Forum
Joined: May 2001
Posts: 5,097
Likes: 1
From: southern NJ
http://www.t1raceparts.com/
http://www.injectordynamics.com/
I've been talking to Tony from T1 and I'll be going with 1000ccs. He gave me nothing but great feedback on his experience with these injectors.
http://www.injectordynamics.com/
I've been talking to Tony from T1 and I'll be going with 1000ccs. He gave me nothing but great feedback on his experience with these injectors.
again... it is a modified injector.
it did not start it's life as a 1000cc injector.
it was modified to flow 1000cc...
Did it come that way flowing 1000cc.. NO.
is it available? YES... I know that (I POSTED A VIDEO OF ONE FLOWING FOR PEOPLE TO SEE THE SPRAY PATTERN!!!!!!)
Asking a point blank question:
"Was this saturated injector made by Bosch?... YES...
Ask another question... "Was it made by Bosch to flow 1000cc off their assembly line?" NO...
Ask another... "Was this injector modified so that that it flows 1000cc?"... YES..
It was already eluded to, without directly saying it, by aaron himself in this thread after I was sent a pair for testing and mentioned that it was modified. I also said I figured out what injector was modified and I was not going to tell anyone to protect them. Seeing the amount of injectors day in and day out, it is not that hard to figure out.
Sorry, I am just sick of people emailing and PM'ing me giving me links to where to buy a saturated 1000cc injector... I KNOW THERE IS ONE AVAILABLE FOR CHRIST SAKE!! I POSTED A FRIKKIN VIDEO OF ONE FLOWING!!! All I said was that is was not MADE TO FLOW A GOD DAMN 1000cc BY BOSCH... I know exactly where to get them (pre-modified) wholesale and modify them myself if I wanted to.
There are side feed injectors that flow in the 1300cc range, offered by RC.... were they made to flow that? NO... RC modifies them to flow 1300cc... so, same thing... there is not a saturated side feed 1300cc injector "made"... it was modified.
PLEASE do not email or PM me telling me I am wrong. I am almost sorry I offered to test one and post a video of the flow.
Jesus H...
[/rant]
RiceFx306, this rant was not directed at you, it just so happened that you were the last person to try to quote what I said and not understand what I was saying. sorry
No worries...now I get what you mean. I was overeager to share what is new to me. Apologies for the misunderstanding.
I looked at the yawpower injectors and found that they only make saturated injectors. I am also looking for peak and hold injectors that I will run off FJO driver. I am looking for 750cc and 1600cc or 1680cc. Or so i think.
After reading this thread and seeing the video I would say that the far right had the best pattern. Were can I get a patter like the right injector in the sizes I need?
I guess the question is still open, Who has the best injector accross the board for this cars? Or is it who makes the best injector for thise cars in the different sizes we use?
After reading this thread and seeing the video I would say that the far right had the best pattern. Were can I get a patter like the right injector in the sizes I need?
I guess the question is still open, Who has the best injector accross the board for this cars? Or is it who makes the best injector for thise cars in the different sizes we use?
Lives on the Forum
Joined: May 2001
Posts: 5,097
Likes: 1
From: southern NJ
are you referring to this video? http://www.youtube.com/watch?v=i-MjDsXgQro if so, that is a standard Bosch 160lb injector... you can easily source these
Lives on the Forum
Joined: May 2001
Posts: 5,097
Likes: 1
From: southern NJ
https://www.rx7club.com/showthread.p...ighlight=venom they normally use a 190cc and bore the hell out of them. it is very common for them to still have the factory part number on them from many fords and miatas that started their life as less than 200cc injector.
Rotary Enthusiast
Joined: Oct 2007
Posts: 799
Likes: 3
From: Plymouth, MN
Just be careful Chris
https://www.rx7club.com/showthread.p...ighlight=venom they normally use a 190cc and bore the hell out of them. it is very common for them to still have the factory part number on them from many fords and miatas that started their life as less than 200cc injector.
https://www.rx7club.com/showthread.p...ighlight=venom they normally use a 190cc and bore the hell out of them. it is very common for them to still have the factory part number on them from many fords and miatas that started their life as less than 200cc injector.
Chris
Joined: Mar 2002
Posts: 1,619
Likes: 502
From: The Elysian Fields (Texas)
Shooting to ship it out the third or forth week this month. Just depends on whether I finish my thesis early or not.
Pretty exciting... Lookin forward to the even half-dozen 1000s at 60 psi base FP... That's a whole lot of corn at 20-25 pounds of boost!!
Pretty exciting... Lookin forward to the even half-dozen 1000s at 60 psi base FP... That's a whole lot of corn at 20-25 pounds of boost!!
Rotary Freak
Joined: Dec 2001
Posts: 2,402
Likes: 0
From: chandler, AZ
^^Hmmm, not sure what happened? Have you left us voicemails? Sorry about that...
If you're looking to get the Yaw/ID injectors, the best place to call is Tony at T1raceparts.com (214)607-9022 or Glen at AZRR.
But what other info are you looking for?
If you're looking to get the Yaw/ID injectors, the best place to call is Tony at T1raceparts.com (214)607-9022 or Glen at AZRR.
But what other info are you looking for?
Thread Starter
Joined: Oct 2003
Posts: 4,453
Likes: 2
From: New York
Yaw Power "Injector Dynamics" I have two for primaries and 4 in the secondary spot. The idle is great but when I step on the throttle it bogs and sputters. I'm playing with some lag times right now but anyone that's done it already could surely save me time. FYI I'm using the Power FC....
When I bought my Yawpower / Injector Dynamics injectors, the vendor also sent me an Excel spreadsheet including all kinds of cool info for each injector including fuel flow vs. pulsewidth vs. pressure, and dead time/ battery offset / lag at different voltages.
The vendor didn't send the spreadsheet until I emailed them to ask about it. This was a while ago so perhaps things may be done differently now.
The vendor didn't send the spreadsheet until I emailed them to ask about it. This was a while ago so perhaps things may be done differently now.
Last edited by scotty305; Jun 5, 2009 at 11:30 PM.
Rotary Freak
Joined: Dec 2001
Posts: 2,402
Likes: 0
From: chandler, AZ
go here: http://www.t1raceparts.com/1000cc_Bo...r_p/b1000s.htm click on "larger photo" and you will find a pic of the data sheet with all the dead times there.
edit: here's the data...
edit: here's the data...
Thread Starter
Joined: Oct 2003
Posts: 4,453
Likes: 2
From: New York
^Unfortunately I have that information already and have no idea how to interpret it. I'm running 43 base fuel pressure, so if you understand the chart please let me know what numbers I need to plug in...
Rotary Freak
Joined: Dec 2001
Posts: 2,402
Likes: 0
From: chandler, AZ
These numbers represent the "lag" times (as the PFC describes) at various voltages. These are in microseconds (usec) and i believe the PFC uses milliseconds (ms) so just move the decimal over three places. Enter in the numbers for 43.5psi on the chart for the various voltages. If the PFC only uses one voltage, which would be utterly retarded, enter in the 14V value since that would be where you should be most of the time. i.e. for 43.5psi, 14V lag time would be 980 usec or .98 ms