Front Wide Fenders 20mm
#5
Senior Member
iTrader: (6)
David Hayes, the fitment appears identical to stock from these pictures. Was there a considerable amount of prep work involved? How do, if at all, the fender liners attach being that the fenders are 20mm wider? What size tires are you running on the front?
Last edited by DJF(NJ); 09-13-17 at 04:06 PM.
#6
Lives on the Forum
iTrader: (6)
The fitment is pretty much stock. Shine makes a good product but the fenders do come with some ripple in them that a body shop can take care of. I had a bit of an issue lining up the panel fitment on one on the back, where the panel meets the passenger door. Massaged it enough to be acceptable but could still use some work. Compared to other after market parts though, not much prep work needed.
Regarding the fender liners, there is a company out of the UK (Concept-7 - Quality, Innovative products for the FDRX7) that makes extenders for wider fenders like these. They are pretty inexpensive and I'd contact them as that would be the easiest way to go. You epoxy them to the Shine fender on the outer inside (if that makes sense) and then affix the stock liners to them. I did not have the time to wait for the extenders so we cut the OEM liner in half longways and then inserted a plastic liner extension in the middle to widen them out. We used a plastic trash can (no kidding) I bought from Lowes and them riveted the materials together. Looks really stock.
Hope this helps.
Regarding the fender liners, there is a company out of the UK (Concept-7 - Quality, Innovative products for the FDRX7) that makes extenders for wider fenders like these. They are pretty inexpensive and I'd contact them as that would be the easiest way to go. You epoxy them to the Shine fender on the outer inside (if that makes sense) and then affix the stock liners to them. I did not have the time to wait for the extenders so we cut the OEM liner in half longways and then inserted a plastic liner extension in the middle to widen them out. We used a plastic trash can (no kidding) I bought from Lowes and them riveted the materials together. Looks really stock.
Hope this helps.
The following users liked this post:
DJF(NJ) (09-19-17)
Trending Topics
#8
Can Post Only in New Member Section
Join Date: Jul 2018
Location: Denver
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I realize this is an old thread, but I was wondering if anyone has (or can take and post) a picture of these shine 20mm fenders from the top? I bought and returned a set of the Chargespeed fenders because they have a weird curve in between the door and the wheel well that doesn't follow the body lines of the car. I would like to get a picture from above to see how the shine fenders handle this transition.
Much thanks!
Much thanks!
Thread
Thread Starter
Forum
Replies
Last Post